EAST steady-state long pulse H-mode with core-edge integration for CFETR
X. Z. Gong,A. M. Garofalo,J. Huang,J. P. Qian,A. Ekedah,R. Maingi,C. T. Holcomb,F. K. Liu,Y. P. Zhao,B. J. Xiao,J. S. Hu,C. D. Hu,L. Q. Hu,M. Wang,H. D. Xu,E. Li,L. Zeng,Q. Zang,H. Q. Liu,B. Lyu,Q. P. Yuan,K. D. Li,B. Zhang,J. Y. Zhang,T. Q. Jia,M. Q. Wu,J. L. Chen,X. Zhu,M. H. Li,X. J. Zhang,L. Zhang,Y. M. Duan,L. Wang,R. Ding,Y. W. Sun,G. S. Xu,Y. F. Liang,N. Xiang,B. N. Wan,J. G. Li
DOI: https://doi.org/10.1088/1741-4326/ac49ad
IF: 3.3
2022-01-01
Nuclear Fusion
Abstract:A recent EAST experiment has successfully demonstrated long pulse steady-state high plasma performance scenario and core-edge integration since the last IAEA in 2018. A discharge with a duration over 60 s with beta (P) similar to 2.0, beta (N) similar to 1.6, H-98y2 similar to 1.3 and an internal transport barrier on the electron temperature channel is obtained with multi-RF power heating and current drive. A higher beta (N) (beta (N) similar to 1.8, beta (p) similar to 2.0, H-98y2 similar to 1.3, n (e)/n (GW) similar to 0.75) with a duration of 20 s is achieved by using the modulated neutral beam and multi-RF power, where several normalized parameters are close or even higher than the phase III 1 GW scenario of CFETR steady-state. High-Z impurity accumulation in the plasma core is well controlled in a low level by using the on-axis ECH. Modeling shows that the strong diffusion of TEM turbulence in the central region prevents tungsten impurity from accumulating. More recently, EAST has demonstrated compatible core-edge integration discharges in the high beta (p) scenario: high confinement H-98y2 > 1.2 with high beta (P) similar to 2.5/beta (N) similar to 2.0 and f (bs) similar to 50% is sustained with reduced divertor heat flux at high density n (e)/n (GW) similar to 0.7 and moderate q (95) similar to 6.7. By combining active impurity seeding through radiative divertor feedback control and strike point splitting induced by resonant perturbation coil, the peak heat flux is reduced by 20-30% on the ITER-like tungsten divertor, here a mixture of 50% neon and 50% D-2 is applied.