Abstract:Transparent conductive electrodes are one of the important components of organic optoelectronic devices. Mg:Ag alloys have been widely used as a semi-transparent cathode for top-emitting organic light-emitting diodes (OLEDs) or transparent OLEDs (TrOLEDs) due to their high conductivity and relatively low work function. However, their low transmittance makes the light-extraction efficiency to be comparatively low. In this study, a highly transparent (84.6% in the visible light range), conductive, laminated cathode with the structure of ZnO/Mg:Ag/ZnO was fabricated via atomic layer deposition (ALD). ALD-deposited ZnO is used to protect the vulnerable ultrathin Mg:Ag-alloy layer, while preserving its low work function for the entire structure. In particular, the bottom ZnO layer is used as an ETL, which can provide reasonable energy alignment between the cathode layer and the emission layer and prevent metal particles from penetrating into the underlying organic layer. The top-emission OLED, which is prepared in this study by using the laminated cathode, showed an 85.8% increase in brightness, with a current density of 11.2 mA/cm3 at 4.0 V, which is an ultra-low voltage compared with devices made with Mg:Ag cathodes. In addition, the total luminance of TrOLEDs increases 34.4% compared with devices using Mg:Ag cathodes. Furthermore, the average transmittance of the device was still as high as 77.19% for visible light.

Calcium Chloride Electron Injection/extraction Layers in Organic Electronic Devices

Electroluminescence performance of organic light-emitting devices with KCl inside hole transport layer

Enhancement of Electron Injection in Organic Light-Emitting Devices Using an Ag/LiF Cathode

A Monolayer Organic Light-Emitting Diode Using an Organic Dye Salt

A highly transparent laminated composite cathode for organic light-emitting diodes

Novel Cs2co3:Ag/Ag Cathode for High-Efficiency Organic Light-Emitting Diodes

Highly efficient and stable electron injection layer for inverted organic light-emitting diodes

Operational stability enhancement in organic light-emitting diodes with ultrathin Liq interlayers

Organic light-emitting devices with a 2-(4-biphenyl)-5-(4-butylphenyl)-1,3,4-oxadiazole layer between the α-naphtylphenyliphenyl diamine and 8-hydroxyquinoline aluminum

Improved Performance of Organic Light-Emitting Diodes with MgF 2 As the Anode Buffer Layer

Efficient Organic Light-Emitting Diode Using Lithium Tetra(8-Hydroxy-Quinolinato) Boron As the Electron Injection Layer

Effective Double Electron Transport Layer Inducing Crystallization of Active Layer for Improving the Performance of Organic Solar Cells

Effect of chloride Ion concentrations on luminescence peak blue shift of light-emitting diode using anti-solvent extraction of quasi-two-dimensional perovskite

Organic Cesium Salt As an Efficient Electron Injection Material for Organic Light-Emitting Diodes

Oxadiazole derivatives used as the host of the metal doped electron transport layer material

P-113: Novel Structure Organic Light-Emitting Diodes with High Performance

Improving the Performance of Red Organic Light-Emitting Transistors by Utilizing a High-k Organic/Inorganic Bilayer Dielectric.

High Contrast Organic Light-Emitting Devices with Improved Electrical Characteristics

Buffer-enhanced Electron Injection in Organic Light-Emitting Devices with Copper Cathode

P-113: Society for Information Display: Novel Structure Organic Light-emitting Diodes With High Performance

Bilayer Electroluminescent Devices of Langmuir-Blodgett Films of Amphiphilic Complex Derivated from 8-Hydroxyquinoline Lanthanum