Abstract:A facile way to fabricate highly efficient organic light emitting devices (OLEDs) with insulator MnO as an electron injecting and transporting material was devised, which eliminates the problem of the oxidation of reactive dopants. The power efficiency of 1.1 lm/W by inserting 3-nm-thick MnO as the electron injecting layer was obtained, higher than the 0.8 lm/W efficiency for the reference device with 0.5-nm-thick LiF. A thermal co-evaporation layer containing 10% weight of MnO and tris(8-hydroxyquinolato) aluminum (Alq(3)) as the electron transporting layer showed more efficient electron transport ability, with turn-on voltage of 3.8 V, lower than 7.4 V for the intrinsic Alq3. Meanwhile, the insertion of thin MnO layer between organic photoactive layer and inorganic metal electrode significantly improved performance and stability of organic solar cell compared to device without it. The power conversion efficiency (PCE) of 2.91% by inserting 3-nm-thick MnO was obtained, higher than the 0.91% efficiency for the device without it, and 2.59% for the device with 0.5-nm-thick LiF. Charge transport of rhenium trioxide (ReO3) in organic electronic devices was investigated. The hole injection/transport was blocked and the electron injection/transport was enhanced with doping of ReO3 in organic electronic devices. Thus the charge balance and efficiency of the OLED were improved, 2.7 cd/A of current efficiency (CE) at 20 mA/cm(2) for the device with ReO3 was higher than 1.5 cd/A for the device without it. In the case of organic photovoltaic cells (OPV), the open-circuit voltage (V-oc), 0.58 V, was higher compared to the device without ReO3 (0.44 V) due to the improvement of interface properties. The PCE was increased to 2.27% by the combination of ReO3 (increasing V-oc) with poly(3,4-ethylene dioxythiophene): poly(styrene-sulfonate) (PEDOT:PSS) (improve hole transport to increase J(sc)) on the modification of the anode, higher than 1.85% for the device without ReO3.

A Monolayer Organic Light-Emitting Diode Using an Organic Dye Salt

High-Performance Light-Emitting Diodes Based on Carbene-Metal-Amides

High-Efficiency Dual-Dopant Polymer Light-Emitting Diodes with Ultrafast Inter-fluorophore Energy Transfer

P-113: Novel Structure Organic Light-Emitting Diodes with High Performance

P-113: Society for Information Display: Novel Structure Organic Light-emitting Diodes With High Performance

A Hybridized Local and Charge‐Transfer Excited State for Highly Efficient Fluorescent OLEDs: Molecular Design, Spectral Character, and Full Exciton Utilization

Construction and evaluation of organic electroluminescent devices

Organic electroluminescence from photovoltaic thin film

Single-layer Small Molecular Organic Light Emitting Diodes Without Hole Transport Layer

High-Efficiency Deep-Blue Organic Light-Emitting Diodes Based on A Thermally Activated Delayed Fluorescence Emitter

Efficient Organic Light-Emitting Diode Using Lithium Tetra(8-Hydroxy-Quinolinato) Boron As the Electron Injection Layer

Air Stable Organic Salt As an n-Type Dopant for Efficient and Stable Organic Light-Emitting Diodes

Investigation of Novel Efficient Electron Injection Lithium Complex Containing Quinoxaline Moiety for Organic Light-Emitting Diodes

Inverted device architecture for high efficiency single-layer organic light-emitting diodes with imbalanced charge transport

N-Type Doping in Organic Electronic Devices

Construction of sublimable pure organic ionic material with high solid luminescence efficiency based on anion-π+ interactions tuning strategy

Efficient Single-Active-Layer Organic Light-Emitting Diodes With Fluoropolymer Buffer Layers

High performance flexible H-shaped single layered organic light emitting diode

Voltage-Dependent Emission Varying from Blue to Orange–Red from a Nondoped Organic Light-Emitting Diode with a Single Emitter

Organic Light-Emitting Diodes Based on New Silole Derivatives

Improved Performance of Alq(3)-based Organic Light-Emitting Diode with Multi-Layer Structure