Abstract:Transparent conductive electrodes are one of the important components of organic optoelectronic devices. Mg:Ag alloys have been widely used as a semi-transparent cathode for top-emitting organic light-emitting diodes (OLEDs) or transparent OLEDs (TrOLEDs) due to their high conductivity and relatively low work function. However, their low transmittance makes the light-extraction efficiency to be comparatively low. In this study, a highly transparent (84.6% in the visible light range), conductive, laminated cathode with the structure of ZnO/Mg:Ag/ZnO was fabricated via atomic layer deposition (ALD). ALD-deposited ZnO is used to protect the vulnerable ultrathin Mg:Ag-alloy layer, while preserving its low work function for the entire structure. In particular, the bottom ZnO layer is used as an ETL, which can provide reasonable energy alignment between the cathode layer and the emission layer and prevent metal particles from penetrating into the underlying organic layer. The top-emission OLED, which is prepared in this study by using the laminated cathode, showed an 85.8% increase in brightness, with a current density of 11.2 mA/cm3 at 4.0 V, which is an ultra-low voltage compared with devices made with Mg:Ag cathodes. In addition, the total luminance of TrOLEDs increases 34.4% compared with devices using Mg:Ag cathodes. Furthermore, the average transmittance of the device was still as high as 77.19% for visible light.

High Contrast Organic Light-Emitting Devices with Improved Electrical Characteristics

Study of Organic Electrolumenescent Thin Film Cell

[High Contrast Organic Light-Emitting Diodes Using Pb-Lif As Cathode].

Contrast-enhancement in Organic Light-Emitting Diodes

High Contrast Tandem Organic Light Emitting Devices

Enhancing the contrast and power efficiency of organic light-emitting diodes using CuPc/TiOPc as an anti-reflection layer

Highly efficient and bright doped organic electroluminescent diodes using an aluminum electrode

A highly transparent laminated composite cathode for organic light-emitting diodes

Low-voltage Top-Emitting Organic Light-Emitting Devices with an Organic Double-Heterojunction Structure

Improved Light Outcoupling For Top-Emitting Organic Light-Emitting Devices

Control Of Carrier Transport In Organic Semiconductors By Aluminum Doping

High Colour Rendering Index White Organic Light-Emitting Devices with Three Emitting Layers

P-113: Novel Structure Organic Light-Emitting Diodes with High Performance

High-Color-Quality Blue Top-Emitting Organic Light-Emitting Diodes with Enhanced Contrast Ratio

P-113: Society for Information Display: Novel Structure Organic Light-emitting Diodes With High Performance

An Efficient Blue Organic Light Emitting Structure

Improved Performance of Alq(3)-based Organic Light-Emitting Diode with Multi-Layer Structure

The colour-tuning effect of 2,9-dimethyl-4,7-diphenyl-1, 10-phenanthroline in blue–red organic light-emitting devices

Highly Power Efficient Organic Light-Emitting Diodes Based on P-Doped and Novel N-Doped Carrier Transport Layers

Chromatic-stability White Organic Light Emitting Diodes Based on Phosphorescence Doped Electron Transport Layer

A green top-emitting organic light-emitting device with improved luminance and efficiency