Abstract:In this study, we investigated ceramic-matrix composite coatings created by laser cladding on 45 steel using tungsten carbide (WC) powder with varying weight percentages of Co or Ni additives. Our analysis focused on the influence of Co additives in WC powders on the key properties of the coatings, including the microstructural evolution, hardness, wear, and residual stress behaviors. High residual stresses led to significant cracking in coatings comprising 100% WC. The addition of Co at a concentration of 20% to WC reduces the cracking activity. The microhardness of the coating exceeded that of the substrate by a factor of more than five. The microstructural evolution revealed a typical intergranular fracture in the molten zone, with cracks propagating through the interior of the unmelted WC at 100% WC. In addition, by adding Ni alloys, the composite coatings were extended to three mixtures: WC-Co, WC-Ni, and WC-Co-Ni. The relationship between the three-component mixtures and wear volume of the laser cladding was established, and the ratios of the three-component mixtures were optimized. A reduced quadratic model for three-component mixtures, which provided a better mixture ratio pattern, showed an excellent fit. Based on the experimental results, the developed three-component mixture with better mixture ratios can enhance anti-wear behavior. A satisfactory agreement was obtained between the predicted and experimental values of the wear volume of the laser-coated welds. Overall, our study accomplishes the optimization of the mixture ratio of the three components, which ensured a reduction in the wear of the welds, thereby improving the performance of laser-coated welds.

Fabrication and Micro-Structure of a Multilayer Functionally Graded (wc–co)–ni Composite

Influences of Ni/Cu/Cr3C2 Composite Additive on Microstructure and Properties of WC–10Co Fine Grained Hardmetal

Characterization and forming process of a functionally graded WC-Co/Ni composite

Fabrication of W–Cu Functionally Graded Material with Improved Mechanical Strength

Microstructures and mechanical properties of the bilayer functionally graded WC-TiC-Ni/Co cemented carbides

Fabrication and Properties of Axisymmetric WC/Co Functionally Graded Hard Metal via Microwave Sintering

Microstructure and mechanical properties of TiC-Ni functionally graded materials by simultaneous combustion synthesis and compaction

Synthesis of Functionally Graded AA7075-B4C Composite with Multi-Level Gradient Structure

Fabrication of Ni/WC composite with two distinct layers through centrifugal infiltration combined with a thermite reaction

Microstructural evolution and performance analysis of WC-11Co reinforced iron matrix composites

Microstructure and Properties of Wcp/Cu Layered Functionally Graded Materials Prepared by Vacuum Hot-Pressed Sintering

Microstructure and properties of Ni-WC gradient composite coating prepared by laser cladding

Deposition of Functionally Graded Material Fabricated by Robot Plasma Arc Welding

Fabrication and microstructure of W/Cu functionally graded material

Fabrication of gradient WC-Ni cemented carbide materials by high gravity-assisted combustion synthesis and infiltration

Microstructure, mechanical and tribological properties of multilayer grapheme reinforced WC-10Ni 3 Al prepared by microwave sintering

Effect of ingredients proportions on mechanical properties in laser-coated WC-blend welds

Multilayer Maraging/CoCrNi Composites With Synergistic Strengthening-Toughening Behavior

Microstructure and Mechanical Properties of Ni-Based Alloy Composite Coating on Cr12MoV by Laser Cladding

Microstructures and Properties of WC-10 wt.%CoCrFeNiAlx Composite Cemented Carbides

Enhancing co-deformation ability of nanograined Ni-W layers in the Ni/Ni-W laminated composites