Abstract:Maraging steels are leading members of the ultra-high strength steel family due to a combination of two solid state reactions: martensitic transformation and subsequent ageing. These steels can be hardened by the precipitation of refined Ni-3(Ti, Mo) intermetallic particles. They have been widely used in the military and aerospace applications such as solid rocket motor cases and submarine shells due to their high strength and toughness. The T250 maraging steel has used Ti as one of the primary strengthening elements to replace Co, which decreases the cost of maraging steels. Its properties are comparable to the standard Co-bearing grades in the 1.4 similar to 2.1 GPa strength levels. It possesses good weldability without porosity in the weld and other weld defects. However, the combination of strength and toughness of welded joints is the main problem which has not been solved well via different welding methods so far. In this work, T250 maraging steel plate with 2 mm thickness was hybrid-treated with laser welding and aging treatment. The strength and toughness of welded joints aged before and after welding were investigated. The microstructures of parent metals and welded joints were observed with OM and SEM. Chemical compositions in parent metals and weld zones were analyzed with EPMA. The tensile strength and static toughness were acquired with the auxiliary device of Gleeble machine and could represent strength and toughness of the welded joints. The results show that the tensile strength and static toughness of the welded joint aged before welding are 62% and 28% that of the aged parent metal, respectively. However, the tensile strength and static toughness of the welded joint aged after welding reach 98% and 71% that of the aged parent metal, respectively. The weld metal is the key zone to influence the strength and toughness of the welded joints. Ni-3(Ti, Mo) precipitates in the weld metal are the intrinsic reason resulting in that the strength and toughness of the welded joint aged after welding are superior to that of the welded joint aged before welding. Ni-3(Ti, Mo) precipitates are beneficial to the strength and static toughness in the elastic deformation stage, and it has a dual effect on the static toughness in the plastic deformation stage of the welded joints. The reverted austenite has a negligible effect on the strength and static toughness in the elastic deformation stage, while it is detrimental to the static toughness in the plastic deformation stage of the welded joints.

Multilayer Maraging/CoCrNi Composites With Synergistic Strengthening-Toughening Behavior

Mechanical property and failure mechanisms of hot rolling and aging treatment with different layer thickness on (CoCrNi)94Al3Ti3/ Maraging -C350 multilayer composite steel

An ultra-high-strength 12Mn maraging steel realized via nanoscale heterostructure engineering

Tuning process parameters to optimize microstructure and mechanical properties of novel maraging steel fabricated by selective laser melting

Effect of Co content on microstructure and mechanical properties of maraging steel

A novel process for simultaneously improving the strength and plasticity of 18Ni(350) maraging steel

Mechanical properties and deformation mechanisms of a novel austenite-martensite dual phase steel

Influences of Cu on Microstructure and Mechanical Properties in Fe–Ni–Al Ultra-Strong Maraging Steels

The Role of Al/Ti in Precipitate-Strengthened and Austenite-Toughened Co-Free Maraging Stainless Steel

Ultrafine-grained dual-phase maraging steel with high strength and excellent cryogenic toughness

Ultrastrong Steel Strengthened by Multiple Shearable Nanostructures

Strength and Toughness of T250 Maraging Steel Joint Hybrid-Treated with Laser Welding and Aging

Annealing-induced Multi-Heterogeneous Microstructure Strengthening in FeCoCrNiMo0.2 High-Entropy Alloys

Microstructural Characterization and Properties of Selective Laser Melted Maraging Steel with Different Build Directions

The role of copper in microstructures and mechanical properties of laser-welded Fe-19Ni-3Mo-1.5Ti maraging steel joint

Synergistic regulation of nano-precipitates and reversed austenite in titanium-free maraging steel by low-temperature solution treatment and double aging treatment

Microstructure Evolution, Mechanical Properties and Deformation Behavior of an Additively Manufactured Maraging Steel

Microstructural Evolution of a FeCo15Cr14Ni4Mo3 Maraging Steel with High Ductility Prepared by Selective Laser Melting

Integrated Computing Accelerates Design and Performance Control of New Maraging Steels

Regulating precipitation behavior in an ultrahigh-strength, high-molybdenum maraging steel via laser powder bed fusion

Deformation Behavior and Strengthening Mechanisms of Multilayer SUS304/Cr17 Steels with Laminate/Network Interface