Abstract:Nonlinear optical (NLO) polymer is a promising material for active waveguide devices that can provide large bandwidth and high-speed response time. However, the performance of the active devices is not only related to the waveguide materials, but also related to the waveguide and electrode structures. In this paper, a high-speed Mach-Zehnder interferometer (MZI) type of electro-optic (EO) switch based on NLO polymer-clad waveguide was fabricated. The quasi-in-plane coplanar waveguide electrodes were also introduced to enhance the poling and modulating efficiency. The characteristic parameters of the waveguide and electrode were carefully designed and simulated. The switches were fabricated by the conventional micro-fabrication process. Under 1550-nm operating wavelength, a typical fabricated switch showed a low insertion loss of 10.2 dB, and the switching rise time and fall time were 55.58 and 57.98 ns, respectively. The proposed waveguide and electrode structures could be developed into other active EO devices and also used as the component in the polymer-based large-scale photonic integrated circuit. (C) 2017 Elsevier B.V. All rights reserved.

FABRICATION OF SU-8 BASED ELECTRO-OPTIC SWITCH USING ALL-WET ETCHING TECHNIQUE

NANOSECOND RESPONSE POLYMER ELECTRO-OPTIC SWITCH WITH HIGH POLING EFFICIENCY AND GOOD LONG-TERM STABILITY

A New Route for Fabricating Polymer Optical Microcavities.

Dynamic Analysis of Low Voltage Micro-machining Based 1×8 Optical Switch

Electro-Optic Polymer Assisted Optical Switch Based on Silicon Slot Structure

Micromachined Optical Switch with a Vertical SU-8 Mirror

Compact Su8-Silica Hybrid Thermo-Optic Switch With Low Power Consumption

Polarisation-insensitive strip-loaded waveguide for electro-optic modulators and switches

The Fabrication of 16*16 MEMS-Based Optical Switch with Accurate Optical Fiber Grooves Integration

Design and Fabrication of a F-P Optical Switch Based on MOEMS Technology

Fabrication of Silicon Photonic Devices by Utilizing Industrial CMOS Technology

Nanosecond Bias-Free Mach–Zehnder Electro-Optic Switch Based on Dye-Doped Polymer DR1/SU-8 and Microstrip Line Electrode

Simulation and optimization of a polymer directional coupler electro-optic switch with push–pull electrodes

Low-voltage Micromachining-Based Scalable Optical Switch

High-speed Electro-Optic Switch Based on Nonlinear Polymer-Clad Waveguide Incorporated with Quasi-in-plane Coplanar Waveguide Electrodes

Fabrication and measurement of DR19/PMMA-based electro-optic switch with nanosecond response time

A non-silicon micro-machining based scalable fiber optic switch

Design of a Polymer Directional Coupler Electro-Optic Switch with Low Push-Pull Switching Voltage at 1550nm

Fabrication of single-mode ridge SU-8 waveguides based on inductively coupled plasma etching

Nanosecond Response Electro‐optic Switch Based on High Cost‐effective Poled Polymeric Material

Mach-Zehnder Based Optical Switches in Silicon-On-Insulator