Abstract:Nonlinear optical (NLO) polymer is a promising material for active waveguide devices that can provide large bandwidth and high-speed response time. However, the performance of the active devices is not only related to the waveguide materials, but also related to the waveguide and electrode structures. In this paper, a high-speed Mach-Zehnder interferometer (MZI) type of electro-optic (EO) switch based on NLO polymer-clad waveguide was fabricated. The quasi-in-plane coplanar waveguide electrodes were also introduced to enhance the poling and modulating efficiency. The characteristic parameters of the waveguide and electrode were carefully designed and simulated. The switches were fabricated by the conventional micro-fabrication process. Under 1550-nm operating wavelength, a typical fabricated switch showed a low insertion loss of 10.2 dB, and the switching rise time and fall time were 55.58 and 57.98 ns, respectively. The proposed waveguide and electrode structures could be developed into other active EO devices and also used as the component in the polymer-based large-scale photonic integrated circuit. (C) 2017 Elsevier B.V. All rights reserved.

Polarisation-insensitive strip-loaded waveguide for electro-optic modulators and switches

Strip-loaded Waveguide Electro-optic Modulator Based on Bonded Organic-inorganic Hybrid Material

Polarization-insensitive Electro-Optical Modulator Based on Polymer-Filled Silicon Cross-Slot Waveguide

Plate-slot polymer waveguide modulator on silicon-on-insulator

Efficient silicon and side-cladding waveguide modulator with electro-optic polymer

&Lt;title>fiber-Coupled Polymer Waveguide for Electro-Optic Modulator</title>

Electro-Optic Polymer Assisted Optical Switch Based on Silicon Slot Structure

High-speed Electro-Optic Switch Based on Nonlinear Polymer-Clad Waveguide Incorporated with Quasi-in-plane Coplanar Waveguide Electrodes

Polarization-Insensitive Electrooptic Modulation on Anisotropic Thin-Film Lithium Niobate

Polymer-Based Electrooptical

Study of Polymer-Based Electrooptic Modulators Using Contact PoliNg

Flexible Waveguide Integrated Thermo-Optic Switch Based on TiO2 Platform

Non-volatile Polarization-Insensitive 1×2 Silicon Optical Switch Using Phase-Change Materials

An Electro-Optic Modulator Based on Geo2-Doped Silica Ridge Waveguides with Thermal Poling

Design of Polarization-Independent Magneto-Optical Waveguides

Electro-Optic Effect Induced by Thermal Poling in Sio2 Ridge Waveguides

A Novel Electrode Structure with a Reverse-Biased P⿿n Diode for High Speed Polymer-Infiltrated Slot Modulators

Optical Circular-Polarization Modulator Employing Tilt-Poled Electrooptic Polymers

Polymer-based Electrooptical Circular-Polarization Modulator

NANOSECOND RESPONSE POLYMER ELECTRO-OPTIC SWITCH WITH HIGH POLING EFFICIENCY AND GOOD LONG-TERM STABILITY

Polarization insensitive waveguide DEMUXes with integrated slab polarization compensator