Abstract:Resonator micro optic gyro (RMOG) is a promising candidate for applications requiring small, light and robust gyros. In optical passive ring resonator gyros, clockwise and counter clockwise lightwaves are modulated at different frequencies to reduce the backscattering induced noise. The effectiveness of this technique, however, is determined by the carrier suppression level. Accurate modulation index and high environmental temperature stability is required for achieving high total carrier suppression for the traditional single phase modulation technique (SPMT). In this paper, we propose an RMOG based on the double phase modulation technique (DPMT). Compared with the traditional SPMT, two additional phase modulations are added to provide additional carrier suppression. It is found that the control accuracy of the modulation index and temperature stability is relaxed more than 30 times. It is easily performed for reducing the backscattering error below the shot noise limited sensitivity. The modulation parameters in the DPMT are analyzed and optimized. Based on the optimum parameters of the DPMT, a bias stability of 1.85 x 10(-4) rad/s is successfully demonstrated in the polarization maintaining silica waveguide resonator with the length of 7.9 cm. This is the best result reported to date, to the best of our knowledge, for a waveguide type passive ring resonator gyro. (C) 2011 Optical Society of America

Design of Polarization-Independent Magneto-Optical Waveguides

A magneto-optical isolator based on series-coupled race-track resonators

Nonreciprocal Magneto-Plasmonic Waveguide with Compact Metal-Sandwiched Structure

Broadband Polarization-Independent Directional Coupler Using Asymmetric-Waveguides

Enhancing the magneto-optical effects in low-biased gyromagnetic media via photonic doping.

Analytical solution to electromagnetic wave transport in planar magneto-optical waveguide: modal dispersion, coupling, and nonreciprocal flow

Integrated optical isolators based on two-mode interference couplers

Polarization characteristics of shallow-etched SOI ridge waveguide with non-rectangular cross section

Polarization-insensitive Electro-Optical Modulator Based on Polymer-Filled Silicon Cross-Slot Waveguide

Silicon-based Optical Waveguide Polarizer Using Photonic Band Gap

Compact and Low Loss Magneto-Optical Waveguide Isolator for TE Mode Based on Lithium Niobate on Insulator

Polarization-Insensitive Electrooptic Modulation on Anisotropic Thin-Film Lithium Niobate

Design of a Broadband and Low Loss TM Magneto-Optical Waveguide Isolator Based on Lithium Niobate on Insulator

Design and Fabrication of a TE-pass Polarizer Based on Silicon Nitride Optical Waveguide

Polarization maintaining silica waveguide resonator optic gyro using double phase modulation technique.

Non-volatile Polarization-Insensitive 1×2 Silicon Optical Switch Using Phase-Change Materials

Theoretical Investigation of Polarization-Dependent Devices Based on the Critical Guiding Condition of Soi Waveguide

Polarization-insensitive Quantum Well Optoelectronic Devices Using Quantum Well Shape Modification

Non-reciprocal Polarization Rotation Using Dynamic Refractive Index Modulation.

Ultra-Low Loss and Ultra-Compact Polarization-Insensitive SOI Multimode Waveguide Crossing Based on an Inverse Design Method

Polarization-insensitive Waveguide Crossings Based on SWGs-assisted MMI