Abstract:Abstract Spherical AlN powders with micrometer size have attracted great attention owing to their good fluidity and dispersity. However, the industrial preparation methods usually require high temperature and long soaking time, which lead to the high cost and limit the wide application of the products. Herein, nearly spherical AlN particles with the average size of 2.5 μm were successfully synthesized via an in-situ combustion synthesis method. The effect of N 2 pressure, NH 4 Cl content, and Al particle size on the combustion reaction procedure, phase composition, and microstructure of the products was systematically investigated. The results showed that the decreased N 2 pressure, increased NH 4 Cl content, and Al particle size led to the decreasing of combustion temperature and speed, which further affected the morphology of the products. As a result, low N 2 pressure (0.2 MPa), a small amount of NH 4 Cl (0.5 wt%), and fine Al particles (∼2.5 μm) contributed to a moderate combustion temperature and facilitated the formation of nearly spherical AlN particles. In addition, based on the gas-releasing assisted quenching experiments and thermo-kinetic analysis, a two-step growth mechanism for the nearly spherical AlN particles was rationally proposed. The present method shows the advantages of low cost and high efficiency for preparing nearly spherical AlN particles, which can be used as raw materials for electronic substrates and fillers for packaging materials.

Preparation of Aluminum Nitride Granules by Aqueous Colloidal Process and the Characteristics of the Sintered Body

Hydrolysis control of AlN powders for the aqueous processing of spherical AlN granules

Preparation of Spherical AlN Granules Directly by Carbothermal Reduction–Nitridation Method

Facile synthesis of monodisperse aluminum nitride microspheres

Gelating and Drying Process of Aqueous Gelcasting Aluminum Nitride Ceramics

Preparation of Aln Films by Pulsed Laser Deposition Using Sintered Aluminum Nitride and Elemental Aluminum As Raw Materials

Synthesis of Aluminum Nitride Powders from A Plasma-Assisted Ball Milled Precursor Through Carbothermal Reaction

Carbothermal Synthesis of Spherical AlN Granules: Effects of Synthesis Parameters and Y2O3 Additive

Preparation of AlN microspheres/UHMWPE composites for insulating thermal conductors

Non hydrolizable aluminum nitride powders surface modified by silicic acids

Preparations of Porous AlN Particles from an Aluminum–magnesium Alloy Melt Solution

Synthesis of AlN nanocrystalline powders

Preparation of AlN Powder of Low Oxygen Content Via Carbothermal Reduction and Nitridation by Active Gas Exchange Technique

Hydrothermal-carbothermal synthesis of highly sinterable AlN nanopowders

Synthesis of Ultrafine AlN Powders in an Al-OC-N System

Characterization of shock waves treated aluminum nitride powder and its potential for low-temperature sintering

RESEARCH ON THE REACTION SYNTHESIS OF AlN-BASED CERAMICS WITH THE ADDITION OF Y2O3

Novel Way to Synthesize Nanocrystalline Aluminum Nitride from Coarse Aluminum Powder

Synthesis of nearly spherical AlN particles by an in-situ nitriding combustion route

SPARK PLASMA SINTERING OF AlN POWDERS OBTAINED FROM COMBUSTION SYNTHESIS AND THEIR THERMAL CONDUCTIVITY

High-Thermal-Conductivity AlN Ceramics Prepared from Octyltrichlorosilane-Modified AlN Powder