Abstract:Single-crystal SiC is a typical third-generation semiconductor power-device material because of its excellent electronic and thermal properties. An ultrasmooth surface with atomic surface roughness that is scratch free and subsurface damage (SSD) free is indispensable before its application. As the last process to reduce the surface roughness and remove surface defects, precision polishing of single-crystal SiC is essential. In this paper, precision polishing technologies for 4H-SiC and 6H-SiC, which are the most commonly used polytypes of single-crystal SiC, such as chemical mechanical polishing (CMP), photocatalytic chemical mechanical polishing (PCMP), plasma-assisted polishing (PAP), electrochemical mechanical polishing (ECMP), and catalyst-referred etching (CARE), were reviewed and compared with emphasis on the experimental setup, polishing mechanism, material removal rate (MRR), and surface roughness. An atomically smooth surface without SSD can be obtained by CMP, PCMP, PAP, and CARE for single-crystal SiC. However, their MRRs are meager, and the waste treatment after CMP is difficult and expensive. Moreover, PAP’s operation is poor due to the complex polishing system, plasma generation, and irradiation devices. A high MRR can be achieved by ECMP. In addition, it is an environmentally friendly precision polishing process for single-crystal SiC since the neutral salt solution is generally used as the electrolyte in ECMP. However, the formation of the egglike protrusions at the oxide/SiC interface during anodic oxidation would lead to a bigger surface roughness after ECMP than that after PAP is processed. The HF solution used in CARE was toxic, and Pt was particularly expensive. Ultrasonic vibration-assisted single-crystal SiC polishing and electrolyte plasma polishing (EPP) were discussed; furthermore, the research direction of further improving the surface quality and MRR of single-crystal SiC was prospected.

Recent Progress on Critical Cleaning of Sapphire Single-Crystal Substrates: A Mini-Review

Characterization of critically cleaned sapphire single-crystal substrates by atomic force microscopy, XPS and contact angle measurements

Nanomaterials and Equipment for Chemical-Mechanical Polishing of Single-Crystal Sapphire Wafers

Gaas Surface Wet Cleaning by A Novel Treatment in Revolving Ultrasonic Atomization Solution

Chemical polishing of sapphire for growth of GaN

Wet etching in beta-Ga2O3 bulk single crystals

Chemical mechanical polishing for sapphire wafers using a developed slurry

Micro-mechanism of glycine action in tribochemical mechanical polishing of single-crystal sapphire substrate: Experimental and first-principles analysis

In-situ Investigation into the Atomic-Scale Removal Behavior of Gallium Nitride

A Review on Precision Polishing Technology of Single-Crystal SiC

Electronic properties of air-exposed GaN$(1\bar{1}00)$ and $(0001)$ surfaces after several device processing compatible cleaning steps

Polishing Performance and Removal Mechanism of Core-Shell Structured Diamond/SiO2 Abrasives on Sapphire Wafer

Effect of different grinding strategies on subsequent polishing processes of sapphire

Effects of plasma treatment on evolution of surface step-terrace structure of critically cleaned c-plane sapphire substrates: An AFM study

Experimental Study of Ultrasonic Vibration Assisted Chemical Mechanical Polishing for Sapphire Substrate

In-situ Cleaning Organic Contaminants on SiO2 Sol-Gel Antireflection Film by Low-Pressure Air Plasma

Enhanced Transmission and Self-Cleaning of Patterned Sapphire Substrates Prepared by Wet Chemical Etching Using Silica Masks

Research progress in the postprocessing and application of GaN crystal

Study on the Surface Morphology of Micro-Particles and the Oxide Layer on Silicon Carbide Crystal Using Nanosecond Green Laser Cleaning Assisted with Airflow

Towards Investigating Surface Quality of Single-Crystal Silicon Optics Polished with Different Processes

Tribochemical mechanisms of abrasives for SiC and sapphire substrates in nanoscale polishing