Abstract:Abstract Ultrasonic-assisted chemical mechanical polishing (UA-CMP) can greatly improve the sapphire material removal and surface quality, but its polishing mechanism is still unclear. This paper proposed a novel model of material removal rate (MRR) to explore the mechanism of sapphire UA-CMP. It contains two modes, namely two-body wear and abrasive-impact. Furthermore, the atomic force microscopy (AFM) in-situ study, computational fluid dynamics (CFD) simulation, and polishing experiments were conducted to verify the model and reveal the polishing mechanism. In the AFM in-situ studies, the tip scratched the reaction layer on the sapphire surface. The pit with a 0.22 nm depth is the evidence of two-body wear. The CFD simulation showed that abrasives could be driven by the ultrasonic vibration to impact the sapphire surface at high frequencies. The maximum total velocity and the air volume fraction (AVF) in the central area increased from 0.26 to 0.55 m/s and 20% to 49%, respectively, with the rising amplitudes of 1–3 μm. However, the maximum total velocity rose slightly from 0.33 to 0.42 m/s, and the AVF was nearly unchanged under 40–80 r/min. It indicated that the ultrasonic energy has great effects on the abrasive-impact mode. The UA-CMP experimental results exhibited that there was 63.7% improvement in MRR when the polishing velocities rose from 40 to 80 r/min. The roughness of the polished sapphire surface was R a = 0.07 nm. It identified that the higher speed achieved greater MRR mainly through the two-body wear mode. This study is beneficial to further understanding the UA-CMP mechanism and promoting the development of UA-CMP technology.

Experimental Study of Ultrasonic Vibration Assisted Chemical Mechanical Polishing for Sapphire Substrate

Effects of the Ultrasonic Flexural Vibration on the Interaction Between the Abrasive Particles; Pad and Sapphire Substrate During Chemical Mechanical Polishing (CMP)

Novel model of material removal rate on ultrasonic-assisted chemical mechanical polishing for sapphire

Research on the Polishing Performance of CMP Slurry for the Sapphire Crystal

Chemical mechanical polishing for sapphire wafers using a developed slurry

Study on Chemical Mechanical Polishing Performances of Sapphire Wafer (0001) Using Silica-Based Slurry

Nanomaterials and Equipment for Chemical-Mechanical Polishing of Single-Crystal Sapphire Wafers

A Feasibility Study on Elliptical Ultrasonic Assisted Grinding of Sapphire Substrate

Experimental Study on Magnetorheological Chemical Polishing for Sapphire Substrate

An Overview of Recent Advances in Chemical Mechanical Polishing (cmp) of Sapphire Substrates

Effect of Potassium Persulfate As an Additive on Chemical Mechanical Polishing Performance on C-, A- and R-Plane Sapphire

Study on Process Optimization of Ultrasound Assisted Magneto-Rheological Polishing of Sapphire Hemisphere Surface Based on Fe3O4/SiO2 Core-Shell Abrasives

STUDY ON CHEMICAL MECHANICAL POLISHING OF R-PLANE SAPPHIRE BY DIFFERENT ADDITIVES

An in Situ Study of Chemical-Mechanical Polishing Behaviours on Sapphire (0001) Via Simulating the Chemical Product-Removal Process by AFM-tapping Mode in Both Liquid and Air Environments

Characterization of ultrasonic vibration and polishing force in sapphire ultrasonic vibration-assisted flexible polishing: Insights from in-situ monitoring systems

A Two-Dimensional Ultrasonically Assisted Grinding Technique for High Efficiency Machining of Sapphire Substrate

AFM and XPS Studies on Material Removal Mechanism of Sapphire Wafer During Chemical Mechanical Polishing (CMP)

Experimental investigation of silicon wafer hybrid polishing by UEV-CMP

Fe-Nx/C Assisted Chemical–mechanical Polishing for Improving the Removal Rate of Sapphire

Experimental Investigation on Hybrid Technology of Ultrasonic Vibration Assisted Chemo-Mechanical Grinding (CMG) Silicon Wafer

A Hybrid Technique of Ultrasonic-Elliptic-Vibration-Assisted Chemical-Mechanical Polishing and its Experimental Investigation