Abstract:Surface etching of single-crystal diamond (SCD) in hydrogen plasma plays a decisive role for high-quality homoepitaxy and surface conduction of diamond. The complexity of surface/subsurface condition such as defects would give rise to the distinct morphology features and even further result in the unpredictable properties. Correspondingly, the evolutionary relationship between the morphology and electrical properties of mechanically polished SCDs which have typical cleavage damage in microns depth after hydrogen plasma treatment still needs to be further completed. In this work, the chemical vapor deposited (CVD) SCDs with uniform polishing-caused subsurface cleavage were immersed in microwave hydrogen plasma for variable duration. Time-dependent morphological evolution, multi-mode etched pits (EPs) (resulting from local defects/cracks and dislocations) and associated etching mechanism were comprehensively studied. At the early stage of plasma treatment before 60 min, owing to the obvious surface roughing generated by preferential etching (with the rate of >400 nm/h) of severe mechanically damaged regions, the hole mobility was significantly deteriorated, also accompanying with the apparent drop of sheet concentration. Concurrently, the deposited surface sp2 amorphous carbon (a-C) nanodots on diamond surface and non-sp3 hydrogen bonds reconstruction, which arising from defect-etching produced local abundant carbon-containing radicals or possible exfoliation generated by hydrogen penetration of massive defective regions, also would play an adverse role for the conduction associated with (100) C–H surface. However, the surface roughness was reduced from the maximum 13.2 nm–4.2 nm by prolonging etching, resulting from the smoothing effect of small-angle crystal misorientation on waved height difference related to the uniform (111) cleavage and the removal of dense irregular EPs associated with polishing-induced local defects as well as the vanishing of surface a-C nanodots. In this case, the improvement of surface electrical properties together with the negative correlation of the mobility and sheet concentration were appeared by the gradual formation of (100) diamond surface and the building of uniform (100) C–H bonds.

Effects of plasma treatment on evolution of surface step-terrace structure of critically cleaned c-plane sapphire substrates: An AFM study

Atomic Step Formation on Sapphire Surface in Ultra-precision Manufacturing

Characterization of critically cleaned sapphire single-crystal substrates by atomic force microscopy, XPS and contact angle measurements

Atomic Step Morphology Research of LED Sapphire Substrate Polishing Surface and Its Periodicity

Smooth etching of sapphire wafers using BCl3 inductively coupled plasmas

Crystallographic and topographical evolutions of a cylinder patterned sapphire substrate etched with a sulfuric acid and phosphoric acid mixture: an SEM and AFM study

A study on the etching characteristics of atmospheric pressure plasma for single-crystal silicon wafer

Recent Progress on Critical Cleaning of Sapphire Single-Crystal Substrates: A Mini-Review

The Effects of Ultra-Smooth Surface Atomic Step Morphology on CMP Performances of Sapphire and SiC Wafers

Surface micro-texture on sapphire fabricated by laser ablation trajectory regulation

Etching Behaviors of Sapphire's C- Plane Cavity

Effect of exposure parameters and annealing on the structure and morphological properties of nanopatterned sapphire substrates prepared by solid state reaction

The effect of inductively-coupled-plasma reactive ion etching power on the etching rate and the surface roughness of a sapphire substrate

AFM and XPS Studies on Material Removal Mechanism of Sapphire Wafer During Chemical Mechanical Polishing (CMP)

The Morphology and Chemistry Evolution of Fused Silica Surface after Ar/CF4 Atmospheric Pressure Plasma Processing

Surface Modification of Silicon Carbide Wafers Using Atmospheric Plasma Etching: Effects of Processing Parameters

Effect of different grinding strategies on subsequent polishing processes of sapphire

Surface etching evolution of mechanically polished single crystal diamond with subsurface cleavage in microwave hydrogen plasma: Topography, state and electrical properties

Crystalline Flat Surface Recovered by High-Temperature Annealing after Laser Ablation

Effects of plasma etching treatment on the adhesion of diamond films

Material removal and surface formation mechanism of C-plane sapphire in multipass ablation by a nanosecond UV laser