Abstract:β−Gallium oxide (β−Ga2O3) is an ultra-wide bandgap (UWBG) semiconductor that is widely recognized as an ideal material for the fabrication of optoelectronic and high-voltage devices. As an advanced sputtering etching technology, focused ion beam (FIB) is increasingly used in the micron and nanoscale processing of semiconductor materials. In this paper, the influence of Ga FIB on β−Ga2O3 sputtering etching is systematically investigated from three parts, namely, the calibration of sputtering yield, the influence of process parameters on etched profiles and the effect of redeposition. Firstly, sputtering etching of β−Ga2O3 substrate was carried out under typical processing conditions with different incident angles, and the key parameter of sputtering yield was precisely calibrated. Further, Yamamura’s model is applied to fit the curve of sputtering yield as a function of incident angle. In addition, the sputtering yield of β−Ga2O3 is compared with those of GaNand Si under the same conditions, revealing the differences between them. Next, through line scan etching and trench structure etching experiments, this study analyzed the maximum etched depth, width, and etched volume variation with ion dose. The evolution of β−Ga2O3 trench structure is described and compared with GaN and GaAs, and from the perspective of redeposition effects, the reasons for the differences between the three in the sputtering etching process are analyzed. Lastly, the study investigated the impact of FIB process parameters on the redeposition effects of β−Ga2O3. Experimental results indicated that significant redeposition effect occurs when etching β−Ga2O3 with large single dwell time. Further analysis identified a specific range of single dwell times under different beam currents that reduce redeposition and prevents the formation of sidewall angles. These findings provide important data support for the high-resolution etching process of β−Ga2O3-based micro-nano devices using FIB technology, and also establish a reliable data foundation for related simulation studies.

Wet etching in beta-Ga2O3 bulk single crystals

Wet Etching in β-Ga2O3 Bulk Single Crystal

Wet etching in β-Ga 2 O 3 bulk single crystals

Etching of Ga2O3: an important process for device manufacturing

Enhancing the Mechanical Strength Ofβ-Ga2o3 with Al Alloying

Wet etching of GaN, AlN, and SiC: a review

Research on K9 Glass Wet Etching for MOEMS Devices

Planar and three-dimensional damage-free etching of β-Ga2O3 using atomic gallium flux

A Systematic Study on Dry Etching Process of Germanium for Ge 3D-Fets Applications

Characteristics of Β-Gallium Oxide Sputtering Etching by Focused Gallium Ion Beam in the Micro-Nano Scale Fabrication

Surface chemical composition and HRTEM analysis of heteroepitaxial β-Ga2O3 films grown by MOCVD

Identification and Suppression of Majority Surface States in the Dry-Etched Β-Ga2o3

Towards atomic-scale smooth surface manufacturing of β -Ga 2 O 3 via highly efficient atmospheric plasma etching

Photoelectrochemical (PEC) etching of Ga2O3

Demonstration of MOCVD based in situ etching of β -Ga2O3 using TEGa

Effect of RF power and gas ratio on the sidewall of β-Ga2O3 films via inductively coupled plasma etching

Application of Wet Chemical Etching in GaN-based Materials

Using selective-area growth and selective-area etching on (−102) β-Ga2O3 substrates to fabricate plasma-damage-free vertical fins and trenches

Recent progresses in thermal treatment of β-Ga2O3 single crystals and devices

Freestanding Crystalline Β-Ga2o3 Flexible Membrane Obtained Via Lattice Epitaxy Engineering for High-Performance Optoelectronic Device.

Photoelectrochemical etching of ultra-wide bandgap β-Ga2O3 semiconductor in phosphoric acid and its optoelectronic device application