Abstract:The Frequency Division Multiplexing (FDM) has been used in wireless communication to transmit large amounts of data. FDM separates and transmits multiple information streams through a single communication channel simultaneously. The capacity to store information increases with higher frequencies. However, the problem of maintaining stability arises with high frequencies. To address this, a frequency multiplier (FM) is employed to convert a low-frequency source, which is easier to stabilize, into a high frequency. To ensure the proper functioning of FM, it is crucial to achieve symmetrical matching between two adjacent waveforms of two cycles of output from one cycle of input. This paper introduces three techniques for FM operation. Firstly, the implementation of tunnel FET (TFET) is proposed to solve the issue of harmonics, which commonly occurs in existing FMs. TFET possesses ambipolar properties, making it suitable for solve harmonic issue. Secondly, high-k (HK) dielectric materials are utilized to enhance on-current and ambipolar current. Lastly, hetero gate dielectrics (HG) are employed to increase the ambipolar current, ensuring its equivalence to the on-current. This contrasts with existing TFETs that use HG to reduce ambipolar current. We can control on-current and ambipolar current, respectively, by adjusting HK length at the source-side and HK at the drain-side using the HG structure. In addition, achieving matching currents is essential for obtaining symmetrical adjacent output waveforms, which is the primary objective of FM. From the proposed structure, we confirmed that frequency doubling is possible by symmetrically matching on-current and ambipolar current for FM to operate normally.

Derivative Superposition Numerical Method for Double-Gate MOSFET Transistor Application to RF Mixer

Derivative superposition method for DG MOSFET application to RF mixer

Double-balanced Mixer Based on Monolayer Graphene Fieldeffect Transistors

The improvement of device linearity in AlGaN/GaN HEMTs at millimeter-wave frequencies using dual-gate configuration

Double-Balanced Graphene Integrated Mixer with Outstanding Linearity.

Arbitrary Alloy Semiconductor Material Based DG MOSFET for High-Frequency Industrial and Hybrid Consumer Applications

DC and Analog/RF Investigation on Germanium Mosfet with Double-Schottky-barrier Source/drain

Linearity Improvement Using a Modified Derivative Superposition Method in Cascaded Stages Amplifier

Design of a Dual-Material Gate LDMOS

A High Performance Double-Balanced Gilbert Mixer with Active Loads for 2.4-GHz ISM Band Application

A Self-Aligned Double-Gate Mos Transistor Technology with Individually Addressable Gates

High Performance SOI Gate-Bulk Connected LCMOSFET for RF Power Amplifier Application in Short and Medium Range Wireless Communication Systems

Analytical Modeling and Simulation of Dual-Material Surrounding-Gate Metal–Oxide–Semiconductor Field Effect Transistors with Single-Halo Doping

Frequency Doubler Utilizing Hetero Gate Dielectric Tunnel Field-Effect Transistor

A 24-to-30 GHz Ultra-High-Linearity Down-Conversion Mixer for 5G Applications Using a New Linearization Method

Analysis and Implementation of Derivative Superposition for A Power Amplifier Driver

Numerical demonstration of SiC trench MOSFET with integrated heterojunction diode for enhanced performance

A double-balanced down converter mixer in GaN-on-Si HEMT technology

Numerical Study on a Lateral Double-Gate Tunnelling Field Effect Transistor

Study on Characteristics of a Dual-Material Gate LDMOS

Operation of Mixer Comprising a Series-Connected Distributed Superconductor–Insulator–Superconductor Junction Array