Abstract:Graphene shows great potential applications in ultrahigh speed electronics due to its high carrier mobility and velocity. Nowadays, many radio frequency circuits based on graphene have been realized. For example, graphene frequency doubler is a promising option for signal generation at high frequencies. Graphene frequency doubler can achieve excellent spectral purity, because of its ambipolar transport and highly symmetric transfer characteristics. Here, we present high performance graphene frequency doublers based on millimeter-scale single-crystal graphene on HfO2 and Si substrates. We achieve a high spectral purity degree of larger than 94% without any filtering and the conversion gain is -23.4 dB at fin=1 GHz. The high conversion gain and spectral purity can be attributed to the high-quality millimeter-scale single-crystal graphene and high-quality high- substrates. Furthermore, we investigate the relation of conversion gain to source-drain voltage Vd and input signal power Pin. The results show that the conversion gain increases with source-drain voltage increasing, and the conversion gain also increases with input signal power increasing. The dependence of conversion gain on Vd and Pin can be attributed to the transconductance increasing with Vd and Pin. We compare the conversion gains and spectral purity degrees of graphene frequency doublers with different transconductances and electron-hole symmetries at different frequencies. The result shows that the conversion gain is larger for device with higher transconductance and the spectral purity has a moderate tolerance for the electron-hole symmetry of the graphene transistor at fin=1 GHz. As the working frequency increases to 4 GHz, the spectral purity of the device with weak electron-hole symmetry decreases dramatically, while the spectral purity of the device with better electron-hole symmetry is kept around 85%. We attribute this phenomenon to the different carrier transit times and different electron-hole symmetries of graphene transistors. In conclusion, the short channel graphene transistor with ultrathin gate dielectric and high electron-hole symmetry is needed in order to achieve high performance graphene frequency doubler.

A Novel Graphene Double-Balanced Passive Mixer.

Double-Balanced Graphene Integrated Mixer with Outstanding Linearity.

Double-balanced Mixer Based on Monolayer Graphene Fieldeffect Transistors

Short-Channel Graphene Mixer with High Linearity

6–12 GHz MMIC Double-Balanced Upconversion Mixer Based on Graphene Diode

Improvement of Conversion Loss of Resistive Mixers Using Bernal-Stacked Bilayer Graphene

A mixer architecture using GaN-based split-gate nanowire transistor

Graphene Distributed Amplifiers: Generating Desirable Gain for Graphene Field-Effect Transistors

A Graphene Based Frequency Quadrupler

Inverted Process Implementation of Monolithic Graphene Mixer

High-Performance CVD Bernal-Stacked Bilayer Graphene Transistors for Amplifying and Mixing Signals at High Frequencies.

Field-Plate Mixer

Gigahertz Frequency Doubler Based on Millimeter-Scale Single-Crystal Graphene'

Monolithic Graphene Frequency Multiplier Working at 10ghz Range

Wafer-Scale Graphene Integrated Circuit

Metal–Insulator–Graphene Diode Mixer Based on CVD Graphene-on-Glass

A double-balanced down converter mixer in GaN-on-Si HEMT technology

Optoelectronic mixing with high-frequency graphene transistors

Asymmetric Two-Terminal Graphene Detector for Broadband Radiofrequency Heterodyne- and Self-Mixing

A High-Performance Top-Gate Graphene Field-Effect Transistor Based Frequency Doubler

Graphene-based ambipolar electronics for radio frequency applications