Abstract:This article presents a fully integrated radio frequency (RF) rectifier on a flexible polyimide (PI) substrate. This circuit is designed and implemented using a chemical-vapor-deposition (CVD) graphene monolithic microwave integrated circuit (MMIC) process, where a metal–insulator–graphene (MIG) diode is employed to obtain the necessary nonlinearity for the rectifier. The smooth surface enables good titanium dioxide (Tio2) barrier interface formation and a higher carrier transport performance of the graphene. Passive components are also developed on the same substrate. To carry out the circuit design, a large-signal diode model is created based on measured results on a test key. A rectifier is deliberately designed for eliminating the input matching network by properly sizing the MIG diode and the load impedance. Removing the matching network results in a compact size and reduces the loss of the input of the rectifier. Nevertheless, the measured input reflection coefficient at 2.4 GHz is −17.5 dB, and measured, peak output dc voltage is 93 mV at an input power of 15.7 dBm. To the best of the authors’ knowledge, this design achieves the highest output voltage of all graphene-based rectifiers on a flexible substrate at 2.4 GHz. Thanks to the CVD graphene MMIC process, a rectifier array could be realized and thus, low-energy devices such as wireless-sensor-network (WSN) and medical implants are potential applications.

Metal–Insulator–Graphene Diode Mixer Based on CVD Graphene-on-Glass

6–12 GHz MMIC Double-Balanced Upconversion Mixer Based on Graphene Diode

Large-Signal Metal-Insulator-Graphene Diode Model on a Flexible Substrate for Microwave Application

Graphene integrated circuits: new prospects towards receiver realisation

30 GHz optoelectronic mixing in CVD graphene

Double-Balanced Graphene Integrated Mixer with Outstanding Linearity.

A 27 - 57 GHz Down-conversion Mixer with Bulk Injection Technique

A Novel Graphene Double-Balanced Passive Mixer.

Flexible One-Dimensional Metal–Insulator–Graphene Diode

X-Band MMIC Balanced Frequency Doubler Based on Graphene Diodes

High Performance Metal-Insulator-Graphene Diodes for Radio Frequency Power Detection Application

The Mach-Zehnder Modulator Based on Bi-Layer Graphene-Silicon-waveguide

Short-Channel Graphene Mixer with High Linearity

Fully Integrated 2.4-Ghz Flexible Rectifier Using Chemical-Vapor-Deposition Graphene MMIC Process

Large-Signal Model of the Metal–Insulator–Graphene Diode Targeting RF Applications

Zero-Bias Mixer Based on AlGaN/GaN Lateral Field-Effect Diodes for High-Temperature Wireless Sensor and RFID Applications

A mixer architecture using GaN-based split-gate nanowire transistor

The Study of Few-Layer Graphene Based Mach−Zehnder Modulator

Graphene in 2D/3D Heterostructure Diodes for High Performance Electronics and Optoelectronics

Double-balanced Mixer Based on Monolayer Graphene Fieldeffect Transistors

A 2.1–2.5 GHz high linearity and low noise down-conversion active mixer