Abstract:Graphene shows great potential applications in ultrahigh speed electronics due to its high carrier mobility and velocity. Nowadays, many radio frequency circuits based on graphene have been realized. For example, graphene frequency doubler is a promising option for signal generation at high frequencies. Graphene frequency doubler can achieve excellent spectral purity, because of its ambipolar transport and highly symmetric transfer characteristics. Here, we present high performance graphene frequency doublers based on millimeter-scale single-crystal graphene on HfO2 and Si substrates. We achieve a high spectral purity degree of larger than 94% without any filtering and the conversion gain is -23.4 dB at fin=1 GHz. The high conversion gain and spectral purity can be attributed to the high-quality millimeter-scale single-crystal graphene and high-quality high- substrates. Furthermore, we investigate the relation of conversion gain to source-drain voltage Vd and input signal power Pin. The results show that the conversion gain increases with source-drain voltage increasing, and the conversion gain also increases with input signal power increasing. The dependence of conversion gain on Vd and Pin can be attributed to the transconductance increasing with Vd and Pin. We compare the conversion gains and spectral purity degrees of graphene frequency doublers with different transconductances and electron-hole symmetries at different frequencies. The result shows that the conversion gain is larger for device with higher transconductance and the spectral purity has a moderate tolerance for the electron-hole symmetry of the graphene transistor at fin=1 GHz. As the working frequency increases to 4 GHz, the spectral purity of the device with weak electron-hole symmetry decreases dramatically, while the spectral purity of the device with better electron-hole symmetry is kept around 85%. We attribute this phenomenon to the different carrier transit times and different electron-hole symmetries of graphene transistors. In conclusion, the short channel graphene transistor with ultrathin gate dielectric and high electron-hole symmetry is needed in order to achieve high performance graphene frequency doubler.

X-Band MMIC Balanced Frequency Doubler Based on Graphene Diodes

An Ultra-Low Power K band Balanced Frequency Doubler with a Novel Current-reused Structure

6–12 GHz MMIC Double-Balanced Upconversion Mixer Based on Graphene Diode

Ultralow Power K-Band Frequency Doubler with Differential Output

Gigahertz Frequency Doubler Based on Millimeter-Scale Single-Crystal Graphene'

A Graphene Based Frequency Quadrupler

A Wideband CMOS Frequency Quadrupler with Transformer-Based Tail Feedback Loop.

A Terahertz Photonic Crystal Wavelength Division Multiplexer Based on Graphene Surface Plasmon Polaritons

A High-Performance Top-Gate Graphene Field-Effect Transistor Based Frequency Doubler

A Balanced Frequency Doubler Covering 140-220 GHz With an Efficiency of 6.8%-11.6%

A Novel Architecture for Frequency Doubler Featuring Compact 3-D Stacked Packaging and Four Multiplying Structures

A Novel Four-Port Configuration With Improved Efficiency and Power-Handling Capability for Diode-Based Doublers in Submillimeter Waves

125 GHz Frequency Doubler Using a Waveguide Cavity Produced by Stereolithography

Graphene integrated circuits: new prospects towards receiver realisation

A 170‐ to 260‐GHz Full‐Band Frequency Doubler Realized by Impedance Compression Matching Technique

Monolithic Graphene Frequency Multiplier Working at 10ghz Range

A 26-38GHz Ultra-Wideband Balanced Frequency Doubler in 0.15µ m GaAs pHEMT Process

An 8.3% Efficiency 96–134 GHz CMOS Frequency Doubler Using Distributed Amplifier and Nonlinear Transmission Line

Double-Balanced Graphene Integrated Mixer with Outstanding Linearity.

A Waveguide Reconfigurable Multiband Terahertz Frequency Doubler Using Choke Flange Technology

A High-Power 170 GHz in-Phase Power-Combing Frequency Doubler Based on Schottky Diodes