Abstract:This article presents a fully differential high-dynamic-range direct-conversion receiver for sub-1-GHz band applications in a 180-nm CMOS technology. The integrated self-adaptive multipart automatic gain control (AGC) loops are designed to cope with large input signal. In the radio frequency (RF) domain, a gain-adjustable noise-canceling balun low-noise amplifier (LNA) and a high-linearity RF variable gain amplifier (VGA) are co-designed to keep a steady differential output power for the mixer stage. In baseband (BB), a novel gain distribution method is proposed to protect BB circuits from saturation. To prove the concept, one of the most typical and strict application scenarios in the sub-1-GHz band, digital television (DTV) standard, is analyzed and chosen as the design target. The receiver achieves a noise figure (NF) of 3.6–4.6 dB in the ultrahigh-frequency (UHF) band. A wide gain tuning range of 128.8 dB is realized in this work, featuring fully integrated AGC loops. The programmable bandwidth of the low-pass filter (LPF) can be adjusted from 1 to 4 MHz, supporting 2-/6-/7-/8-MHz signal channels. The maximum in-band third-order input-referred intercept point (IIP3) is 10 dBm under the conversion gain of 0 dB. The receiver consumes 49.56 mA from a 1.8-V voltage supply and occupies an area of 3.56 mm2.

Ultralow Power K-Band Frequency Doubler with Differential Output

An Ultra-Low Power K band Balanced Frequency Doubler with a Novel Current-reused Structure

A Sub-1-GHz Band High-Dynamic-Range Receiver with Integrated Self-Adaptive Multipart AGC Loops

A Wideband CMOS Frequency Quadrupler with Transformer-Based Tail Feedback Loop.

A 27 - 57 GHz Down-conversion Mixer with Bulk Injection Technique

A 26-38GHz Ultra-Wideband Balanced Frequency Doubler in 0.15µ m GaAs pHEMT Process

Ultralow Power E-Band Low-Noise Amplifier with Three-Stacked Current-Sharing Amplification Stages in 28-Nm CMOS

A 0.6-V Zero-IF/Low-IF Receiver with Integrated Fractional-N Synthesizer for 2.4-Ghz ISM-Band Applications.

Analysis and Design of Ultra-Wideband Low-Noise Amplifier with Input/Output Bandwidth Optimization and Single-Ended/Differential-Input Reconfigurability.

An 8.3% Efficiency 96–134 GHz CMOS Frequency Doubler Using Distributed Amplifier and Nonlinear Transmission Line

A Balanced Frequency Doubler Covering 140-220 GHz With an Efficiency of 6.8%-11.6%

A Compact 24.5–32.6 GHz CMOS Frequency Doubler Based On Coupled Inductor

Optimally Matched 189-232 GHz 6.8 dBm Output Power CMOS Frequency Doubler

A 94-GHz Frequency Doubler in Nano-Scale CMOS Technology for W -Band Millimeter Wave Passive Imaging Systems

An 8mw Ultra Low Power 60ghz Direct-Conversion Receiver with 55db Gain and 4.9db Noise Figure in 65nm CMOS

A 39 GHz–80 GHz Millimeter-Wave Frequency Doubler with Low Power Consumption in 65nm CMOS Tehnology

A High-Power 170 GHz in-Phase Power-Combing Frequency Doubler Based on Schottky Diodes

A 5.1 Dbm 127–162 GHz Frequency Sextupler with Broadband Compensated Transformer-Based Baluns in 22nm FD-SOI CMOS

A Novel Architecture for Frequency Doubler Featuring Compact 3-D Stacked Packaging and Four Multiplying Structures

A 3.1–4.8 GHz Transmitter with a High Frequency Divider in 0.18 Μm CMOS for OFDM-UWB

A Novel Four-Port Configuration With Improved Efficiency and Power-Handling Capability for Diode-Based Doublers in Submillimeter Waves