Abstract:The theoretical analysis reveals that there is a contradiction between the optimum embedding impedance of the diode and the matching circuit. They have opposite trajectory directions on the Smith chart with frequency, limiting the bandwidth of frequency multipliers. Under this constraint, an impedance compression matching technique (ICMT) is proposed in this paper, which is demonstrated to be helpful to realize broadband design of terahertz frequency multipliers. In this paper, the bandwidth limitations of frequency multipliers are analyzed theoretically in terms of maximum power transmission. The analysis shows that due to conjugate with the impedance of the diode itself, the optimum embedded impedance of the diode possesses a counterclockwise impedance trajectory versus frequency on the Smith chart, whereas the matching circuit exhibits a clockwise impedance trajectory versus frequency on the Smith chart. Under this constraint, an impedance compression matching technique (ICMT) is proposed to realize broadband design for terahertz frequency multipliers. Based on the proposed design method, a 170‐ to 260‐GHz full‐band frequency doubler was designed, fabricated, and measured. The measured results show that the doubler achieves an output power of 4–7.5 mW in the entire frequency band under 140‐mW input power, corresponding to a conversion loss of 12.5–15.4 dB.

A Wideband CMOS Frequency Quadrupler with Transformer-Based Tail Feedback Loop.

A Low Power V-Band CMOS Frequency Divider with Wide Locking Range and Accurate Quadrature Output Phases.

A High-Precision Ultra-Broadband Quadrature Generation at Millimeter-Wave Frequencies

An Ultra-Low Power K band Balanced Frequency Doubler with a Novel Current-reused Structure

A Wide Locking Range and Low Power V-band Frequency Divider in 90nm CMOS

Ultralow Power K-Band Frequency Doubler with Differential Output

Quadrature Injection Locked Frequency Tripler with Wide Tuning Range and Low Quadrature Error for MM-Wave Applications

A 13.5-to-28.8ghz 72.3%-Locking Range Multi-Phase Injection-Locked Frequency Tripler with Improved Output Power and Wideband Subharmonic-Spur Rejection in 28nm CMOS

A 39 GHz–80 GHz Millimeter-Wave Frequency Doubler with Low Power Consumption in 65nm CMOS Tehnology

A CMOS W-band ×4 frequency multiplier with cascading push-pull frequency doublers

An 8.3% Efficiency 96–134 GHz CMOS Frequency Doubler Using Distributed Amplifier and Nonlinear Transmission Line

A 5.1 Dbm 127–162 GHz Frequency Sextupler with Broadband Compensated Transformer-Based Baluns in 22nm FD-SOI CMOS

An X-Band Quadruple Frequency Multiplier in 65-Nm CMOS Process

A 232GHz Frequency Multiplier Chain(×4) in 65-nm CMOS with Harmonic Rejection Ratio of 40dBc

Delay-locked Loop Based Frequency Quadrupler with Wide Operating Range and Fast Locking Characteristics

A K-Band Frequency Tripler Using Transformer-Based Self-Mixing Topology with Peaking Inductor

A Cmos 21-48ghz Fractional-N Synthesizer Employing Ultra-Wideband Injection-Locked Frequency Multipliers

A 170‐ to 260‐GHz Full‐Band Frequency Doubler Realized by Impedance Compression Matching Technique

Analysis and Design of Ultra-Wideband Mm-Wave Injection-Locked Frequency Dividers Using Transformer-Based High-Order Resonators.

A Frequency Doubler With Second Harmonic Feedback for Wideband, Efficient Frequency Multiplication at Millimeter-Wave

A Wide Locking Range and Low Dc Power Injection-Locked Frequency Tripler for K-Band Application