Abstract:Graphene shows great potential applications in ultrahigh speed electronics due to its high carrier mobility and velocity. Nowadays, many radio frequency circuits based on graphene have been realized. For example, graphene frequency doubler is a promising option for signal generation at high frequencies. Graphene frequency doubler can achieve excellent spectral purity, because of its ambipolar transport and highly symmetric transfer characteristics. Here, we present high performance graphene frequency doublers based on millimeter-scale single-crystal graphene on HfO2 and Si substrates. We achieve a high spectral purity degree of larger than 94% without any filtering and the conversion gain is -23.4 dB at fin=1 GHz. The high conversion gain and spectral purity can be attributed to the high-quality millimeter-scale single-crystal graphene and high-quality high- substrates. Furthermore, we investigate the relation of conversion gain to source-drain voltage Vd and input signal power Pin. The results show that the conversion gain increases with source-drain voltage increasing, and the conversion gain also increases with input signal power increasing. The dependence of conversion gain on Vd and Pin can be attributed to the transconductance increasing with Vd and Pin. We compare the conversion gains and spectral purity degrees of graphene frequency doublers with different transconductances and electron-hole symmetries at different frequencies. The result shows that the conversion gain is larger for device with higher transconductance and the spectral purity has a moderate tolerance for the electron-hole symmetry of the graphene transistor at fin=1 GHz. As the working frequency increases to 4 GHz, the spectral purity of the device with weak electron-hole symmetry decreases dramatically, while the spectral purity of the device with better electron-hole symmetry is kept around 85%. We attribute this phenomenon to the different carrier transit times and different electron-hole symmetries of graphene transistors. In conclusion, the short channel graphene transistor with ultrathin gate dielectric and high electron-hole symmetry is needed in order to achieve high performance graphene frequency doubler.

Monolithic Graphene Frequency Multiplier Working at 10ghz Range

Inverted Process for Graphene Integrated Circuits Fabrication

A Graphene Based Frequency Quadrupler

Gigahertz Frequency Doubler Based on Millimeter-Scale Single-Crystal Graphene'

A Terahertz Photonic Crystal Wavelength Division Multiplexer Based on Graphene Surface Plasmon Polaritons

Monolithic Three‐dimensional Integration of Aligned Carbon Nanotube Transistors for High‐performance Integrated Circuits

Frequency Multiplier Based On Back-Gated Graphene Fets With M-Shaped Resistance Characteristics

30 GHz Monolithically Integrated Frequency Multiplier Based on GaN Planar Schottky Barrier Diode

Wafer-Scale Graphene Integrated Circuit

Graphene Distributed Amplifiers: Generating Desirable Gain for Graphene Field-Effect Transistors

Scalable Fabrication of Self-Aligned Graphene Transistors and Circuits on Glass.

Gigahertz Field-Effect Transistors with CMOS-Compatible Transfer-Free Graphene

A Novel Graphene Double-Balanced Passive Mixer.

100 GHz Transistors from Wafer Scale Epitaxial Graphene

Wafer-scale Graphene Electro-absorption Modulators Fabricated in a 300mm CMOS Platform

Double-Balanced Graphene Integrated Mixer with Outstanding Linearity.

X-Band MMIC Balanced Frequency Doubler Based on Graphene Diodes

A Pure Frequency Tripler Based on Cvd Graphene

An Embedded Gate Graphene Field Effect Transistor with Natural Al Oxidization Dielectrics and Its Application to Frequency Doubler

Deep-submicron Graphene Field-Effect Transistors with State-of-Art Fmax

Terahertz Modulator Based On Graphene-Embedded Waveguide