Abstract:One of the most significant challenges for the fabrication of any microelectro-mechanical-system (MEMS) device is the low cost and high throughput packaging of the device to protect it from the environmental particles, moisture, and contaminations. In this work, an RF-MEMS switch for millimeter-wave (mm-wave) applications is monolithically integrated into the aluminum-based back-end-of-line (BEOL) of a 130-nm bipolar CMOS (BiCMOS) technology by wafer-level thin-film encapsulation (WLE). Both wet and vapor release techniques are developed and demonstrated for the release of the MEMS device, prior to wafer-level encapsulation packaging. The final device encapsulation is realized as wafer-level packaging with a 3- thick metal grid using a stack of Ti/TiN/AlCu/Ti/TiN layers. Finally, a silicon dioxide deposition process with a high deposition rate (HDR) is applied for the full encapsulation of the release holes. The impact of the encapsulation on the RF-MEMS switch performance is evaluated by low-frequency – and high-frequency -parameter measurements at -Band. The results indicate the full function of the device without a significant performance drop. The encapsulation does not require an extra mask and it is developed as 8-in wafer-level process, thus providing a low cost and high throughput solution for RF-MEMS device encapsulation and packaging.

Monolithic Mems Soc Design And Fabrication Using 0.35 Mu M Bcd Technology

Microdevice Array Design and Fabrication in Monolithic MEMS SoC

Micro device array design and fabrication in monolithic MEMS SoC.

Physical design optimization of MOSFETs for millimeter wave and sub-millimeter wave circuits

Recent Advances in Monolithic Integration of Diverse Technologies with Si CMOS

Post-CMOS Process for High-Aspect-ratio Monolithically Integrated Single Crystal Silicon Microstructures

Design and fabrication of MEMS devices using the integration of MUMPs, trench-refilled molding, DRIE and bulk silicon etching processes

A CMOS Compatible Process for Monolithic Integration of High-Aspect-ratio Bulk Silicon Microstructures

Monolithic Integration of a Wafer-Level Thin-Film Encapsulated mm-Wave RF-MEMS Switch in BEOL of a 130-nm SiGe BiCMOS Technology

Highly Processable Wtsv Modular Manufacturing for Next Generation 3D MEMS/NEMS Integrated System

CMOS MEMS: A Key Technology Towards the &#x201c;more Than Moore&#x201D; Era

Study on Compatible Cmos-Mems Process with Surface Micromachining for the Application of Monolithic Integration

BEOL modifications of a 130 nm SiGe BiCMOS technology for monolithic integration of thin-film wafer-level encapsulated D-Band RF-MEMS switches

Inter-CMOS process for monolithic integrated MEMS resonator

High Performance 70 Nm Cmos Device and Key Technologies

Process-induced stress and hydrogen effects on monolithic integrated BiCMOS-MEMS resonators

Monolithic Integration Of Micro-Cantilever With Conditioning Circuits Based On Soi Techniques

Design and fabrication of a monolithic optoelectronic integrated circuit chip based on CMOS compatible technology

A molded surface-micromachining and bulk etching release (MOSBE) fabrication platform on (1 1 1) Si for MOEMS

A Generalized Cmos-Mems Platform For Micromechanical Resonators Monolithically Integrated With Circuits