Abstract:The continuous push for high-performance photonic switches is one of the most crucial premises for the sustainable scaling of programmable and reconfigurable photonic circuits for a wide spectrum of applications. Large-scale photonic switches constructed with a large number of 2$\times$2 elementary switches impose stringent requirements on the elementary switches. In contrast to conventional elementary switches based on mode interference or mode coupling, here we propose and realize a brand-new silicon MEMS 2$\times$2 elementary switch based on a split waveguide crossing (SWX) consisting of two halves. With this structure, the propagation direction of the incident light can be manipulated to implement the OFF and ON states by splitting or combining the two halves of the SWX, respectively. More specifically, we introduce refractive-index engineering by incorporating subwavelength-tooth (SWT) structures on both reflecting facets to further reduce the excess loss in the ON state. Such a unique switching mechanism features a compact footprint on a standard SOI wafer and enables excellent photonic performance with low excess loss of 0.1-0.52/0.1-0.47dB and low crosstalk of $\lt$-37/-22.5dB over an ultrawide bandwidth of 1400-1700nm for the OFF/ON states in simulation, while in experiment, excess loss of 0.15-0.52/0.42-0.66dB and crosstalk of $\lt$-45.5/-25dB over the bandwidth of 1525-1605 nm for the OFF/ON states have been measured.Furthermore, excellent MEMS characteristics such as near-zero steady-state power consumption, low switching energy of sub-pJ, switching speed of {\mu}s-scale, durability beyond 10^9 switching cycles, and overall device robustness have been achieved. Finally, a 16$\times$16 switch using Benes topology has also been fabricated and characterized as a proof of concept, further validating the suitability of the SWX switches for large-scale integration.

BEOL modifications of a 130 nm SiGe BiCMOS technology for monolithic integration of thin-film wafer-level encapsulated D-Band RF-MEMS switches

Monolithic Integration of a Wafer-Level Thin-Film Encapsulated mm-Wave RF-MEMS Switch in BEOL of a 130-nm SiGe BiCMOS Technology

Novel Monolithic Integration of RF-MEMS Switch with CMOS-IC on Organic Substrate for Compact RF System

Recent Advances in Monolithic Integration of Diverse Technologies with Si CMOS

Integration of RF MEMS and CMOS IC on a Printed Circuit Board for a Compact RF System Application Based on Wafer Transfer

Integration of RF-MEMS, passives and CMOS-IC on silicon substrate by low temperature wafer to wafer bonding technique

A Wafer Transfer Technology for Integration of RF MEMS and CMOS on Organic Substrate

Microstrip lateral RF MEMS switch integrated with multistep CPW transition

Monolithic Mems Soc Design And Fabrication Using 0.35 Mu M Bcd Technology

Monolithic back-end-of-line integration of phase change materials into foundry-manufactured silicon photonics

Design and fabrication of MEMS devices using the integration of MUMPs, trench-refilled molding, DRIE and bulk silicon etching processes

RF MEMS Switch Integrated on Printed Circuit Board with Metallic Membrane First Sequence and Transferring

Silicon photonic MEMS switches based on split waveguide crossings

RF MEMS-CMOS Device Integration: An Overview of the Potential for RF Researchers

Wafer-Level Packaging Method For Rf Mems Applications Using Pre-Patterned Bcb Polymer

An Approach Of Lateral Rf Mems Switch For High Performance

Beyond CMOS: heterogeneous integration of III–V devices, RF MEMS and other dissimilar materials/devices with Si CMOS to create intelligent microsystems

A New Approach of Lateral RF MEMS Switch

A Novel Three-State RF MEMS Switch for Ultrabroadband (DC-40 GHz) Applications

A High-Performance 220–290 GHz Micromachined Waveguide Switch Based on Interference Between MEMS Reconfigurable Surfaces

Mitigation of substrate coupling effects in RF switch by localized substrate removal using laser processing