Abstract:This work, for the first time, presents a platform for designing microelectromechanical system (MEMS) capacitive transducers featuring multiple transduction gaps implemented by a traditional $0.18~\mu \text{m}$ 1-Poly-6-Metal (1P6M) complementary metal-oxide-semiconductor (CMOS) technology. As a capacitive transducer, different sizes of the transduction gap will bring distinct pros and cons, and designers often need to make trade-off among various performance metrics. The proposed CMOS-MEMS platform provides three types of transduction gap spacing that cover from narrow to large in single chip with excellent circuit integration capability. Based on a partial etching technique applied on back-end-of-line (BEOL) metal layers while utilizing anti-reflective coating (titanium nitride, TiN) as electrodes, transduction gap spacing of 125 nm, 400 nm, and 930 nm can be fabricated simultaneously without damaging the integrated circuit. Among these three devices, the latest metal-insulator-metal (MIM) device, which features a 125 nm transduction gap and provides a record-low motional resistance, is introduced with detail design guideline and layout tutorial for the first time. The post-CMOS fabrication process of the multi-gap platform is validated using three simple clamped-clamped beam structures being verified as capacitive resonators with similar frequency for extracting their mechanical and electromechanical coupling characteristics. Finally, a dual-gap capacitive micromachined ultrasonic transducer (CMUT) array is illustrated as a feasible application of the proposed platform offering different transduction gaps for signal transmission and reception. [2023-0073]

A Generalized Cmos-Mems Platform For Micromechanical Resonators Monolithically Integrated With Circuits

A generalized foundry CMOS platform for capacitively-transduced resonators monolithically integrated with amplifiers

Vhf Cmos-Mems Oxide Resonators With Q > 10,000

Inter-CMOS process for monolithic integrated MEMS resonator

High- Integrated CMOS-MEMS Resonators With Deep-Submicrometer Gaps and Quasi-Linear Frequency Tuning

Platform Development for CMOS-MEMS Multi-Gap Capacitive Transducers

A Fully Differential CMOS–MEMS DETF Oxide Resonator with $Q > \hbox{4800}$ and Positive TCF

A Low Impedance CMOS-MEMS Capacitive Resonator Based on Metal-Insulator-Metal (MIM) Capacitor Structure

Miniaturized Multi-Cantilever MEMS Resonators with Low Motional Impedance

Realizing Deep-Submicron Gap Spacing for CMOS-MEMS Resonators with Frequency Tuning Capability Via Modulated Boundary Conditions

A High-Q Microwave MEMS Resonator

Design and Optimization of a Novel Resonant Accelerometer Resonator

Micromechanical resonators for oscillators and filters

A GHz Silicon-Based Width Extensional Mode MEMS Resonator with Q over 10,000

Design and Simulation of MEMS Silicon Micro-Cantilever Resonant Sensor

Design and Fabrication of Micromachined Resonators

A High-Performance Bulk Mode Single Crystal Silicon Microresonator Based On A Cavity-Soi Wafer

Design, Fabrication, and Dynamic Analysis of a MEMS Ring Resonator Supported by Twin Circular Curve Beams

A CMOS Compatible Process for Monolithic Integration of High-Aspect-ratio Bulk Silicon Microstructures

Integrated Acoustic Resonators in Commercial Fin Field-Effect Transistor Technology

Monolithic Integrated Multiband Acoustic Devices on Heterogeneous Substrate for Sub-6 GHz RF-FEMs