Abstract:<p>Micro electromechanical system resonators (MEMS) are being explored to fulfil the demands of speedy wireless communication circuits, which may be utilized as oscillators and/or filters in radio transceivers. Micro resonators of radio frequency range are involved in variety of commercial applications as a replacement of traditional bulky devices due to their small size, high quality factor and most importantly CMOS compatibility. In this work, the design and fabrication of laterally vibrating contour mode MEMS resonator of global system for mobile communication range frequency is presented. Zinc oxide (ZnO), a green piezoelectric material has been used. The ZnO films can also be deposited at low temperature thus reduces thermal budget. An excellent biocompatible/biodegradable property of ZnO may also be useful in resonators used as the detector for mass/pressure sensing for medical applications. The performance of fabricated MEMS resonator is validated by numerical simulations and experimental electrical characterization. The results show that the resonator may be deployed for radio frequency communication. The process to fabricate the resonator has been developed and the devices have been fabricated by surface micromachining techniques on silicon wafer using two electron beam, two optical lithography processes and simple and cost-effective wet etching method used for ZnO etching over costly DRIE process.</p><h3>Graphic abstract</h3> <a href="https://media.springernature.com/original/springer-static/image/art%3A10.1007%2Fs00542-019-04509-w/MediaObjects/542_2019_4509_Figa_HTML.png"><span>Open image in new window</span></a>

Design and Fabrication of Micromachined Resonators

Microelectromechanical Resonators for Radio Frequency Communication Applications

Fabrication of high-Q microresonators in dielectric materials using a femtosecond laser: Principle and applications

Si-based MEMS Resonant Sensor: A Review from Microfabrication Perspective

A Comparative Study Between a Micromechanical Cantilever Resonator and MEMS-based Passives for Band-pass Filtering Application

A Generalized Cmos-Mems Platform For Micromechanical Resonators Monolithically Integrated With Circuits

Design, Fabrication, and Dynamic Analysis of a MEMS Ring Resonator Supported by Twin Circular Curve Beams

Micromechanical resonators for oscillators and filters

Numerical Modeling of MEMS Resonators

Fabrication of MEMS Resonators in Thin SOI

Microelectromechanical filters for signal processing

Microelectromechanical System Resonant Devices: A Guide for Design, Modeling and Testing

Concepts and Key Technologies of Microelectromechanical Systems Resonators

The Recent Progress of MEMS/NEMS Resonators

Fabrication and characterization of zinc oxide piezoelectric MEMS resonator

Analysis and Design Considerations for Achieving the Fundamental Limits of Phase Noise in mmWave Oscillators With On-Chip MEMS Resonator

Centimeter-scale nanomechanical resonators with low dissipation

Microelectromechanical system cantilever-based frequency doublers

Nanoscale imaging of super-high-frequency microelectromechanical resonators with femtometer sensitivity

Microfabrication Technology of Three-Dimensional Microdevices and Their Mems Applications

Tuning dissipation dilution in 2D material resonators by MEMS-induced tension