Abstract:3D system-in-package has recently been considered a major enabler for high density and heterogeneous microsystem integration. We hereby proposed the concept of a unified micromachining and packaging platform based on LTCC (low temperature cofired ceramic) material system and process, which is implemented by first enhancing an existing LTCC hybrid IC fabrication line and then integrating different LTCC micromachining process modules one by one. Hence, the unified process flow can be accomplished within just one single package-test house. The platform has been capable of micromachining basic 3D MEMS (micro electromechanical system) microstructures into LTCC laminates and using them as a packaging substrate for mounting IC/MEMS from other process platforms, realizing self-contained and versatile microsystems of high density. The 3D microstructures formation process consisting of green tape machining, lamination and cofiring are demonstrated. The designing, analysis and fabricated samples of various micro functional structure enabled by the platform are illustrated, including embedded cooling microchannels (capable of lowering substrate temperature by more than 50K), microaccelerometer for harsh environment, micro Pirani gauge for in-situ vacuum level monitoring and THz (tera hertz) vacuum microelectronic devices. Samples of overall packaged MEMS and IC chips with micromachined LTCC substrate are displayed, showing ultra-low leakage (< 5 x 10(-11) Pa . m(3)/s) vacuum packaging capability and significantly enhanced device performance. In addition, the platform has demonstrated the potential of stacking several laminates with mounted chips into a 3D frame-like microsystem. In comparison, 3D integration purely based on Si micromachining, e. g. anodic-bonding based in-situ wafer encapsulation, may only support a very limited spectrum of devices/materials and integration density and is somehow too expensive for many MEMS researchers.

Microdevice Array Design and Fabrication in Monolithic MEMS SoC

Micro device array design and fabrication in monolithic MEMS SoC.

Monolithic Mems Soc Design And Fabrication Using 0.35 Mu M Bcd Technology

Design and fabrication of MEMS devices using the integration of MUMPs, trench-refilled molding, DRIE and bulk silicon etching processes

A CMOS Compatible Process for Monolithic Integration of High-Aspect-ratio Bulk Silicon Microstructures

Study on Compatible Cmos-Mems Process with Surface Micromachining for the Application of Monolithic Integration

Post-CMOS Process for High-Aspect-ratio Monolithically Integrated Single Crystal Silicon Microstructures

Patterned Microstructure Array Fabrication By Using A Novel Standing Surface Acoustic Wave Device

Three-dimensional integration of suspended single-crystalline silicon MEMS arrays with CMOS

A Novel Fabrication Methodology for Micromachined Sensor-Arrays with Multi-Thickness Configuration

Realization of Three-Dimensionally MEMS Stacked Comb Structures for Microactuators Using Low-Temperature Multi-Wafer Bonding with Self-Alignment Techniques in CMOS-Compatible Processes

A Flip-Chip Assembled Microplatform For Hybrid Mems

Micromachining of Multi-Thickness Sensor-Array Structures with Dual-Stage Etching Technology

CMOS MEMS: A Key Technology Towards the &#x201c;more Than Moore&#x201D; Era

Process-induced stress and hydrogen effects on monolithic integrated BiCMOS-MEMS resonators

Fabrication of High‐Density Micro‐Bump Arrays for 3D Integration of MEMS and CMOS

Low Cost and High‐Aspect Ratio Micro/Nano Device Fabrication by Using Innovative Metal‐Assisted Chemical Etching Method

Micorfabrication of Miniature Electrode Array along Micro Channels

Microfabrication Technology of Three-Dimensional Microdevices and Their Mems Applications

Investigation Of A Unified Ltcc-Based Micromachining And Packaging Platform For High Density/Multifunctional Microsystem Integration