Abstract:A novel micromachining technology for multilevel structures of silicon is described in this paper. Complicated multilevel structures can be formed by using a maskless etching following a conventional masked etching in aqueous KOH. The process consists of two successive steps. First, structures with (111) sidewalls are formed for a desired etching depth on the surface of a (100) silicon wafer by a conventional masked anisotropic etching process with a specially designed etching mask. Then, the etching mask is removed except for some areas (such as the frame of the chip) and a maskless etching follows. In addition to the downward etching of the upper and lower (100) planes during maskless etching, fast-etching (311) planes emerge at the upper edges of the (111) sidewalls and cut the (111) sidewalls, while the (111) sidewalls extend downward at the lower ends. As the (311) planes replace the (111) sidewalls with a rate faster than the extension rate of the (111) planes, the (111) sidewalls will finally be replaced by (311) planes. Moreover, by an appropriate mask design and an appropriate etching depth of the previous masked etching, the bottom areas of some etching cavities diminish temporarily so that the downward etching in these areas is stopped for time intervals after the intersection of (111) planes on the bottom and before the (111) planes are replaced completely by the (311) planes. Once the (111) sidewalls are replaced completely by the (311) planes, the bottom areas reappear and the etching downward resumes. Analyses show that levels with different depths can be created in this way for different window apertures and the number, positions as well as the depths of the new levels can be individually decided by the design of the single mask for masked etching and the etch depths of both masked and maskless etching processes. More than 10 interesting multilevel structures with up to five structure levels have been fabricated. The results show that the technology is very versatile and repeatable. Therefore, this technology is a very useful new tool for making silicon micromechanical structures to meet the ever-increasing demands for solid-state sensors and actuators. (C) 1997 Elsevier Science S.A.

Micromachining of Multi-Thickness Sensor-Array Structures with Dual-Stage Etching Technology

A Novel Fabrication Methodology for Micromachined Sensor-Arrays with Multi-Thickness Configuration

Maskless Anisotropic Etching-a Novel Micromachining Technology for Multilevel Microstructures

Flexible capacitive pressure sensor array using acoustic-assisted fabrication of microstructures as surface and dielectric layers

A novel micromachining technology for multilevel structures of silicon

Patterned Microstructure Array Fabrication By Using A Novel Standing Surface Acoustic Wave Device

Multi-layer Microstructure Fabrication by Combining Bulk Silicon Micromachining and UV-LIGA Technology

Marangoni-driven deterministic formation of softer, hollow microstructures for sensitivity-enhanced tactile system

A Single-Sided Multilevel Structure for Silicon Pressure Transducers by ''Masked-Maskless'' Etching Technology

Micro device array design and fabrication in monolithic MEMS SoC.

Microdevice Array Design and Fabrication in Monolithic MEMS SoC

Design and micro-machining fabrication of piezoelectric diaphragm chambers for biomaterial detection

Low Cost and High‐Aspect Ratio Micro/Nano Device Fabrication by Using Innovative Metal‐Assisted Chemical Etching Method

Micro-milling/micro-EDM Combined Processing Technology for Complex Microarray Cavity Fabrication

Automatic Microassembly System for Die Level Fabrication of MEMS Pressure Sensor

Micro-electro-mechanical system fabrication technology applied to large area x-ray image sensor arrays

Design and fabrication of MEMS devices using the integration of MUMPs, trench-refilled molding, DRIE and bulk silicon etching processes

Biomimetic Contact Behavior Inspired Tactile Sensing Array with Programmable Microdomes Pattern by Scalable and Consistent Fabrication

Study on maskless etching of silicon symmetric beam-mass structure in aqueous KOH

Novel masked-mask-free etching technology for silicon multilevel microstructures

Complex microstructure fabrication by integrating silicon anisotropic etching and UV-LIGA technology