Abstract:With the rapid development of key industries such as new energy vehicles, smart homes, smart phones and consumer grade drones, the demand for high performance miniature micro- pressure sensors is also growing promptly. At prssent, most of the pressure sensors of this type adopt a C-type structure, and the thickness of the sensitive diaphragm needs to be continuously thinned in order to improve the sensitivity of this type sensor, which leads to its sensitivity to etching errors and makes it difficult to ensure the linearity of the pressure sensor. Based on this, we designed a miniature micro-pressure half active Wheatstone bridge piezoresistive pressure sensor with C-type square diaphragm structure, whose area is reduced by shortening the number of leads and pads, through ion impantation on the surface of the diaphragm to create a piezoresistors, using deep reactive ion etching (DRIE) technology to release the pressure sensitive diaphragm with length of 460 μm × 460 μm, thinkness of 7.5 μm. The buried oxygen layer in the SOI(silicon on insulator) can play a role of stopping the etching, which assures the uniformity of the released sensitive diaphragm and the non-linear errors of the sensor while maintains its sensitivity. In this paper, the influence of piezoresistor position offset on the performance of the pressure sensor is analyzed by means of simulation, which improves the accuracy of the designed model and guarantees its performance parameters can meet the design indicators. Finally, the static characteristics of the sensor is calibrated. The experimental results show that the sensitivity of the sensor is up to 0.538 mV kPa-1/3.5 V in the range of 40 kPa at room temperature, and the non-linear error is only 0.386 % FS. This study provides some new ideas and references for the design work of high performance micro-pressure sensors.

A Single-Sided Multilevel Structure for Silicon Pressure Transducers by ''Masked-Maskless'' Etching Technology

A Flexible Crosstalk-Free Piezoresistive Pressure Sensor Array Based on Interdigital-Electrode for High-Precision Pressure Mapping

A Novel Peninsula-island Structure for Sensing Ultra-low Pressure Based on Dry-wet Combination Etching Process.

The Novel Structural Design for Pressure Sensors

A High-Dynamic and Ultra-Low Pressure Sensor with a Novel Beam-Island-Membrane Structure

A Novel Pressure Sensor Structure for Integrated Sensors

The Design and Optimization of a Highly Sensitive and Overload-Resistant Piezoresistive Pressure Sensor.

A Novel Piezoresistive Sensitive Structure for Micromachined High-Pressure Sensors.

Micromachining of Multi-Thickness Sensor-Array Structures with Dual-Stage Etching Technology

Design and fabrication of a tiny micro-pressure sensor with improved linearity and sensitivity

A Novel Structure of Pressure Sensors

A Novel Pressure Microsensor with 30- $\mu \Hbox{m}$-Thick Diaphragm and Meander-Shaped Piezoresistors Partially Distributed on High-Stress Bulk Silicon Region

A piezoresistive pressure sensor with centralized piezoresistors and a diamond-shape composite diaphragm

Structured Diaphragm with a Centre Boss and Four Peninsulas for High Sensitivity and High Linearity Pressure Sensors

A High Sensitive Pressure Sensor with the Novel Bossed Diaphragm Combined with Peninsula-Island Structure

A 2000-Atmosphere Bulk-Type Pressure Sensor Realized on (001) Substrate with Selective Stress-Filtering Trenches

A New Silicon Diaphragm Pressure Sensor and Its Stress Analysis

Multiscale Hierarchical Design of a Flexible Piezoresistive Pressure Sensor with High Sensitivity and Wide Linearity Range.

Silicon Micromachined TSVs for Backside Interconnection of Ultra-Small Pressure Sensors

Maskless Anisotropic Etching-a Novel Micromachining Technology for Multilevel Microstructures

Modeling and Analysis of a Novel Combined Peninsula–island Structure Diaphragm for Ultra-Low Pressure Sensing with High Sensitivity