Abstract:With the rapid development of key industries such as new energy vehicles, smart homes, smart phones and consumer grade drones, the demand for high performance miniature micro- pressure sensors is also growing promptly. At prssent, most of the pressure sensors of this type adopt a C-type structure, and the thickness of the sensitive diaphragm needs to be continuously thinned in order to improve the sensitivity of this type sensor, which leads to its sensitivity to etching errors and makes it difficult to ensure the linearity of the pressure sensor. Based on this, we designed a miniature micro-pressure half active Wheatstone bridge piezoresistive pressure sensor with C-type square diaphragm structure, whose area is reduced by shortening the number of leads and pads, through ion impantation on the surface of the diaphragm to create a piezoresistors, using deep reactive ion etching (DRIE) technology to release the pressure sensitive diaphragm with length of 460 μm × 460 μm, thinkness of 7.5 μm. The buried oxygen layer in the SOI(silicon on insulator) can play a role of stopping the etching, which assures the uniformity of the released sensitive diaphragm and the non-linear errors of the sensor while maintains its sensitivity. In this paper, the influence of piezoresistor position offset on the performance of the pressure sensor is analyzed by means of simulation, which improves the accuracy of the designed model and guarantees its performance parameters can meet the design indicators. Finally, the static characteristics of the sensor is calibrated. The experimental results show that the sensitivity of the sensor is up to 0.538 mV kPa-1/3.5 V in the range of 40 kPa at room temperature, and the non-linear error is only 0.386 % FS. This study provides some new ideas and references for the design work of high performance micro-pressure sensors.

A New Silicon Diaphragm Pressure Sensor and Its Stress Analysis

A Novel Pressure Microsensor with 30- $\mu \Hbox{m}$-Thick Diaphragm and Meander-Shaped Piezoresistors Partially Distributed on High-Stress Bulk Silicon Region

A piezoresistive pressure sensor with centralized piezoresistors and a diamond-shape composite diaphragm

Analysis and design of a four-terminal silicon pressure sensor at the centre of a diaphragm

A novel pressure sensor design for low pressure ranges

Realization and Characterization of a Bulk-Type All-Silicon High Pressure Sensor

A high pressure sensor with circular diaphragm based on MEMS technology

The Design and Analysis of Piezoresistive Shuriken-Structured Diaphragm Micro-Pressure Sensors

A Novel Pressure Sensor Structure for Integrated Sensors

High Sensitive and Linear Pressure Sensor for Ultra-low Pressure Measurement

Optimal design of high-sensitivity pressure sensor with peninsula-structured diaphragm

Design and fabrication of a tiny micro-pressure sensor with improved linearity and sensitivity

Study of Local Stress Using Stress-Absorbing Si Diaphragm

A Novel Combined Pressure/Temperature Microsensor

An SOI-Structured Piezoresistive Differential Pressure Sensor with High Performance

A Flexible Pressure Sensor Based on Silicon Nanomembrane

The Effect of Shear-Stress on the Piezoresistance of Silicon

A Diaphragm Secondary Stress Utilization Method for Increasing the Sensitivity of Piezoresistive Pressure Sensors Without Sacrificing Linearity

A high sensitivity and high linearity pressure sensor based on a peninsula-structured diaphragm for low-pressure ranges

A 1200-Atmosphere Bulk-Type All-Silicon Pressure Sensor

A novel 0-5 kpa piezoresistive pressure sensor based on peninsula structure diaphragm