Abstract:With the rapid development of key industries such as new energy vehicles, smart homes, smart phones and consumer grade drones, the demand for high performance miniature micro- pressure sensors is also growing promptly. At prssent, most of the pressure sensors of this type adopt a C-type structure, and the thickness of the sensitive diaphragm needs to be continuously thinned in order to improve the sensitivity of this type sensor, which leads to its sensitivity to etching errors and makes it difficult to ensure the linearity of the pressure sensor. Based on this, we designed a miniature micro-pressure half active Wheatstone bridge piezoresistive pressure sensor with C-type square diaphragm structure, whose area is reduced by shortening the number of leads and pads, through ion impantation on the surface of the diaphragm to create a piezoresistors, using deep reactive ion etching (DRIE) technology to release the pressure sensitive diaphragm with length of 460 μm × 460 μm, thinkness of 7.5 μm. The buried oxygen layer in the SOI(silicon on insulator) can play a role of stopping the etching, which assures the uniformity of the released sensitive diaphragm and the non-linear errors of the sensor while maintains its sensitivity. In this paper, the influence of piezoresistor position offset on the performance of the pressure sensor is analyzed by means of simulation, which improves the accuracy of the designed model and guarantees its performance parameters can meet the design indicators. Finally, the static characteristics of the sensor is calibrated. The experimental results show that the sensitivity of the sensor is up to 0.538 mV kPa-1/3.5 V in the range of 40 kPa at room temperature, and the non-linear error is only 0.386 % FS. This study provides some new ideas and references for the design work of high performance micro-pressure sensors.

Analysis and design of a four-terminal silicon pressure sensor at the centre of a diaphragm

A New Silicon Diaphragm Pressure Sensor and Its Stress Analysis

Realization and Characterization of a Bulk-Type All-Silicon High Pressure Sensor

A Novel Pressure Microsensor with 30- $\mu \Hbox{m}$-Thick Diaphragm and Meander-Shaped Piezoresistors Partially Distributed on High-Stress Bulk Silicon Region

A Differential Hall Effect Based Pressure Sensor

A high pressure sensor with circular diaphragm based on MEMS technology

Structured Diaphragm with a Centre Boss and Four Peninsulas for High Sensitivity and High Linearity Pressure Sensors

A piezoresistive pressure sensor with centralized piezoresistors and a diamond-shape composite diaphragm

A novel pressure sensor design for low pressure ranges

High Sensitive and Linear Pressure Sensor for Ultra-low Pressure Measurement

Prefabrication design, theoretical framework and simulation demonstration of a meander-shaped MEMS piezoresistive pressure sensor implanted on silicon substrate circular diaphragm for enhancement of key performance parameters utilized for low-pressure applications

Optimal design of high-sensitivity pressure sensor with peninsula-structured diaphragm

Design of 6H-Sic High Temperature Pressure Sensor Chip

Design of pressure-sensing diaphragm for MEMS capacitance diaphragm gauge considering size effect

A Novel Pressure Sensor Structure for Integrated Sensors

A 1200-Atmosphere Bulk-Type All-Silicon Pressure Sensor

Efficient in-depth analysis and optimum design parameter estimation of MEMS capacitive pressure sensor utilizing analytical approach for square diaphragm

A Single-Side Micromachined MPa-Scale High-Temperature Pressure Sensor

A high sensitivity and high linearity pressure sensor based on a peninsula-structured diaphragm for low-pressure ranges

A resonant high-pressure microsensor based on a composite pressure-sensitive mechanism of diaphragm bending and volume compression

Design and fabrication of a tiny micro-pressure sensor with improved linearity and sensitivity