Abstract:A thermal wind sensor utilizes the fact that airflow over a heated plate will cool it asymmetrically, with the upstream part of the plate being cooled more than the downstream part. In the temperature-balanced (TB) mode, the heating power may be distributed spatially in the sensor such that any flow-induced temperature gradient is cancelled. Information about the airflow can be extracted in the distribution of heating power in the sensor. Ideally, the influence of changes in the ambient temperature on the sensor’s output can be eliminated if in the whole measurement range the temperature sensor sensitivities are equal. However, because of the temperature dependency of the material properties of the airflow and the sensor, it may have a temperature drift. This paper, for the first time, investigates temperature effects of the ceramic microelectromechanical system (MEMS) thermal wind sensor based on the TB mode. The sensor consists of four outlying heaters and four inlying thermistors in two orthogonal directions on a ceramic substrate. When working in the TB mode, it could measure wind speed and wind direction by applying a power difference on the upstream and downstream heaters, so that the flow-induced temperature gradient is eliminated. Theoretical analysis has been developed which takes the variations of thermophysical properties in the sensor and the control circuits into account. Experiments for testing wind speed and direction have been performed in a wind tunnel with an adjustable ambient temperature. It shows that the wind speed is linearly influenced by the ambient temperature while the wind direction is inherently unaffected by ambient temperature variations. After compensation, the sensor shows a credible performance with an error of less than ±1m/s in wind speed and ±2° in wind direction in a temperature range from 0 °C to 30 °C.

Temperature Effects on the Wind Direction Measurement of 2D Solid Thermal Wind Sensors

Simulation Analysis of Temperature Effects on All-Fiber Optic Current Sensor

Modeling of Temperature Effects on Micromachined Silicon Thermal Wind Sensors

Temperature Effects of a Ceramic MEMS Thermal Wind Sensor Based on a Temperature-Balanced Mode

Experiments and Solution of Asymmetry Effect for Mems Thermal Wind Sensor

Analysis on Thermal Performance of Silicon Wind Sensor

Design of a 2D Thermal Wind Sensor Based on MEMS Process

Effect of Packaging Asymmetry on the Performance of A 2d Mems Thermal Wind Sensor with Different Heating Geometries

Effects of Ambient Humidity on a Micromachined Silicon Thermal Wind Sensor

Efficient system-level simulations of thermal wind sensors considering environmental factors

Modeling, Simulation, and Fabrication of a 2-D Anemometer Based on a Temperature-Balanced Mode

Analytic Model of Dual-Layer-Structure MEMS Thermal Wind Sensor with Increased Sensitivity

2-D Micromachined Thermal Wind Sensors—A Review

Temperature Effect and Its Compensation of a Micromachined 2-D Anemometer

Thermal-Film Temperature-Difference-Based CMOS Wind Sensor Design and Realization

Modelling and Characterization of a Robust, Low-Power and Wide-Range Thermal Wind Sensor

Research on Dust Effect for MEMS Thermal Wind Sensors

Development of A Self-Packaged 2d Mems Thermal Wind Sensor for Low Power Applications

Linearity and Sensitivity Analysis of MEMS Thermal Wind Sensor via Analytical Model

Experiment Of The Mems Wind Sensor Based On Temperature-Balanced Mode

A Novel 2-D Wind Sensor with Thermal Feedback