Abstract:Abstract In this paper, we propose a thermal wind speed sensor Verilog-A model with thermal-fluid-electric hybrid characteristics. Because the structure of the thermal wind sensor and the interface circuit chip are designed separately, which cannot effectively carry out MEMS-IC (integrated circuit) co-simulation, the overall performance of the sensor and interface circuit chip is prone to large deviation. At the same time, the separation of MEMS structure and IC design process leads to long product development cycle and high cost. This paper proposes an improved simulation model by analyzing the behavior characteristics of the thermal wind speed sensor. The simulation model consists of 11 thermistors, 3 capacitors, a voltage-controlled voltage source, and a voltage-controlled current source. The Taylor series expansion of the differential equation of heat conduction is carried out, and then the thermistor and capacitor networks are established according to the corresponding relationship between the thermal parameters and the electrical parameters, including the thermal conduction unit, the convection unit and the heat capacity in the chip. The model fully considers the effects of various physical effects and parasitic effects, and is implemented using the hardware description language Verilog-A. The sensor and interface circuit can be simulated simultaneously to optimize the circuit design. It is beneficial to the integration of sensors and interface circuit, reducing the number of tape-outs, increasing the success rate, and reducing costs. The consistency between the simulation results and the experimental curves verified the correctness of the macro model. The behavior characteristics of constant power (CP) and constant temperature heating were described. In CP mode, the output voltage error is less than ± 6.5%, the chip temperature error is less than 4.0%. The presented modeling approach can be the basis for the development of complete MEMS-IC design technology library of thermal wind speed sensor, aiming at optimum designs of integrated thermal wind speed sensor.

Thermal-Film Temperature-Difference-Based CMOS Wind Sensor Design and Realization

Design and Test of a Two-dimensional Integrated Flow Sensor by CMOS Technology

CMOS thermal wind sensor and its package

Analysis on Thermal Performance of Silicon Wind Sensor

A CMOS Temperature Sensor with Versatile Readout Scheme and High Accuracy for Multi-Sensor Systems

A Novel 2-D Wind Sensor with Thermal Feedback

A Hot Film Wind Sensor with Four Constant Temperature Difference Elements Fabricated on Ceramic Substrate

Modelling and Characterization of a Robust, Low-Power and Wide-Range Thermal Wind Sensor

Design of a 2D Thermal Wind Sensor Based on MEMS Process

Wide span thermal wind sensor system with dual chips

Development of A Self-Packaged 2d Mems Thermal Wind Sensor for Low Power Applications

Temperature Effects on the Wind Direction Measurement of 2D Solid Thermal Wind Sensors

COMPACT MEMS THERMAL WIND SENSOR USING DUAL POLYSILICON LAYERS WITH IMPROVED ACCURACY

Design and Simulation of A Micromachined Cmos Temperature Sensor

Design of wind sensor system based on microcontroller

A Robust and Low-Power 2-D Thermal Wind Sensor Based on a Glass-in-silicon Reflow Process

A 2D Wind Sensor Using the $\Delta$ P Thermal Feedback Control

Analytic Model of Dual-Layer-Structure MEMS Thermal Wind Sensor with Increased Sensitivity

Octagon-Shaped 2-D Micromachined Thermal Wind Sensor for High-Accurate Applications

An efficient macro model for CMOS-MEMS thermal wind speed sensor

Sensitivity Improvement of a 2D MEMS Thermal Wind Sensor for Low-Power Applications