Abstract:Abstract In this paper, we propose a thermal wind speed sensor Verilog-A model with thermal-fluid-electric hybrid characteristics. Because the structure of the thermal wind sensor and the interface circuit chip are designed separately, which cannot effectively carry out MEMS-IC (integrated circuit) co-simulation, the overall performance of the sensor and interface circuit chip is prone to large deviation. At the same time, the separation of MEMS structure and IC design process leads to long product development cycle and high cost. This paper proposes an improved simulation model by analyzing the behavior characteristics of the thermal wind speed sensor. The simulation model consists of 11 thermistors, 3 capacitors, a voltage-controlled voltage source, and a voltage-controlled current source. The Taylor series expansion of the differential equation of heat conduction is carried out, and then the thermistor and capacitor networks are established according to the corresponding relationship between the thermal parameters and the electrical parameters, including the thermal conduction unit, the convection unit and the heat capacity in the chip. The model fully considers the effects of various physical effects and parasitic effects, and is implemented using the hardware description language Verilog-A. The sensor and interface circuit can be simulated simultaneously to optimize the circuit design. It is beneficial to the integration of sensors and interface circuit, reducing the number of tape-outs, increasing the success rate, and reducing costs. The consistency between the simulation results and the experimental curves verified the correctness of the macro model. The behavior characteristics of constant power (CP) and constant temperature heating were described. In CP mode, the output voltage error is less than ± 6.5%, the chip temperature error is less than 4.0%. The presented modeling approach can be the basis for the development of complete MEMS-IC design technology library of thermal wind speed sensor, aiming at optimum designs of integrated thermal wind speed sensor.

Design and Simulation of A Micromachined Cmos Temperature Sensor

An All-Digital CMOS Temperature Sensor with a Wide Supply Voltage Range.

A CMOS Temperature Sensor with Versatile Readout Scheme and High Accuracy for Multi-Sensor Systems

Piezoresistive temperature sensors fabricated by a surface micromachining CMOS MEMS process

Modeling and Simulation of a Novel Capacitive Temperature Sensor

Design of resonant MEMS temperature sensor

A Micromachined Silicon Capacitive Temperature Sensor for Wide Temperature Range Applications

A micromachined silicon capacitive temperature sensor for radiosonde applications

A New Type of CMOS Temperature Sensor

Integrated Ultrahigh-Sensitivity Temperature Sensor Based on Asymmetric Mach–Zehnder Interferometer and Stress Deformation of Aluminum-SiO2

An efficient macro model for CMOS-MEMS thermal wind speed sensor

Type of CMOS temperature sensor

Thermal-Film Temperature-Difference-Based CMOS Wind Sensor Design and Realization

The Design of A Novel MEMS Temperature Sensor

Development of a Microcantilever Temperature Sensor Based on Optical Readout

Design and numerical simulation of a humidity sensor based on CMOS fabrication technology

Design of a CMOS Integrated Temperature Sensor Based on Dynamic Element Matching

Modeling of Temperature Effects on Micromachined Silicon Thermal Wind Sensors

Design of CMOS Temperature Detection Circuit

CMOS Integrated Sensor Circuit for Temperature Measurement Based on 50 Nm Technology

Temperature Characteristics of 4H-Sic Substrate and Thin-Film Resistor Applied in MEMS Piezoresistive Sensors