Abstract:This article presents a CMOS transistor-based smart temperature sensor for ON-chip thermal management. The temperature sensor utilizes proportional to absolute temperature (PTAT) and complementary to absolute temperature (CTAT) currents to control their ring oscillators and then generates a digital temperature code accordingly. Replacing a constant with temperature (CWT) current with a CTAT current as the reference brings two benefits: 1) the dynamic range of the output temperature is enlarged and 2) the design complexity of the reference path is reduced. The nonlinearity introduced by the CTAT reference can be mitigated in the circuit design by evaluating its Taylor formula and configuring its parameters. In addition, the proposed design supports both local and remote sensing by placing the paired PTAT and CTAT sensing elements in either a local or remote ON-chip position. Such paired sensing elements’ placement schemes can achieve ultralow area occupation and reduce nonidealities by quantizing the ratio of output frequencies. A prototype sensor occupies $9148 \mu \text {m}^{{2}}$ with an additional $173 \mu \text {m}^{{2}}$ for one remote hot-spot sensing in a 65-nm CMOS technology was implemented. After a two-point calibration and system error removal, it achieves $-0.35\,\,^{\circ }\text{C}$ /+0.58 °C peak-to-peak inaccuracy over 0 °C–95 °C. At the conversion time of 1.2 ms, 0.054 °C resolution is achieved at room temperature. Operating from a 1.0 V supply, it consumes $4.053 \mu \text{W}$ at room temperature, which yields 14.17 pJ $\cdot \text {K}^{{2}}$ resolution figure-of-merit (FoM).

Type of CMOS temperature sensor

A New Type of CMOS Temperature Sensor

An All-Digital CMOS Temperature Sensor with a Wide Supply Voltage Range.

A CMOS Temperature Sensor with Versatile Readout Scheme and High Accuracy for Multi-Sensor Systems

Temperature Sensors Based on CMOS Sub-Threshold Characteristic

A 0.8V Capacitively-Biased BJT-Based Temperature Sensor with an Inaccuracy of ±0.4°C ($\mathbf{3}\mathbf{\sigma}$) from −40°C to 125°C in 22nm CMOS

A 0.26-Pj·k2 2400-Μm2 Digital Temperature Sensor in 55-Nm CMOS

A Dynamic-Biased Resistor-Based CMOS Temperature Sensor with a Duty-Cycle-Modulated Output

An Untrimmed BJT-Based Temperature Sensor with Dynamic Current-Gain Compensation in 55-Nm CMOS Process

A BJT-Based CMOS Temperature Sensor with Duty-Cycle-Modulated Output and ±0.5°C (3σ) Inaccuracy from −40 °C to 125 °C

An Energy-Efficient Capacitively Biased Diode-Based Temperature Sensor in 55-nm CMOS

A 1.2V Self-Referenced Temperature Sensor with a Time-Domain Readout and a Two-Step Improvement on Output Dynamic Range

An Energy-Efficient BJT-Based Temperature Sensor with +/- 0.8 degrees C (3 sigma) Inaccuracy from-50 to 150 degrees C

A 1770- $\mu$ M 2 Leakage-Based Digital Temperature Sensor with Supply Sensitivity Suppression in 55-Nm CMOS

A 1.39nj/conversion CMOS Temperature Sensor with 173 Um2 Sensing Core for Remote Sensing in 65nm CMOS

A Novel CMOS Temperature Sensor with High Accuracy Wide Supply Voltage Range

A Novel Low Power Wide Supply Voltage Range Cmos Temperature Sensor With-0.2/0.5 Degrees C Error From-20 Degrees C To 60 Degrees C

Design of a CMOS Integrated Temperature Sensor Based on Dynamic Element Matching

A novel low power wide supply voltage range CMOS temperature sensor with 0.2/0.5°C error from -20°C to 60°C

A 14.17pj.k2 FoM CMOS Temperature Sensor with 173 Μm2 Sensing Core for Remote Sensing in 65-Nm CMOS

CMOS Integrated Sensor Circuit for Temperature Measurement Based on 50 Nm Technology