Abstract:A thermal wind sensor utilizes the fact that airflow over a heated plate will cool it asymmetrically, with the upstream part of the plate being cooled more than the downstream part. In the temperature-balanced (TB) mode, the heating power may be distributed spatially in the sensor such that any flow-induced temperature gradient is cancelled. Information about the airflow can be extracted in the distribution of heating power in the sensor. Ideally, the influence of changes in the ambient temperature on the sensor’s output can be eliminated if in the whole measurement range the temperature sensor sensitivities are equal. However, because of the temperature dependency of the material properties of the airflow and the sensor, it may have a temperature drift. This paper, for the first time, investigates temperature effects of the ceramic microelectromechanical system (MEMS) thermal wind sensor based on the TB mode. The sensor consists of four outlying heaters and four inlying thermistors in two orthogonal directions on a ceramic substrate. When working in the TB mode, it could measure wind speed and wind direction by applying a power difference on the upstream and downstream heaters, so that the flow-induced temperature gradient is eliminated. Theoretical analysis has been developed which takes the variations of thermophysical properties in the sensor and the control circuits into account. Experiments for testing wind speed and direction have been performed in a wind tunnel with an adjustable ambient temperature. It shows that the wind speed is linearly influenced by the ambient temperature while the wind direction is inherently unaffected by ambient temperature variations. After compensation, the sensor shows a credible performance with an error of less than ±1m/s in wind speed and ±2° in wind direction in a temperature range from 0 °C to 30 °C.

Effects of Ambient Humidity on a Micromachined Silicon Thermal Wind Sensor

Modeling of Temperature Effects on Micromachined Silicon Thermal Wind Sensors

The Study of Humidity Effect on Self-Heated Surface Micromachined Polysilicon Resistor

Effect of Insulation Trenches on Micromachined Silicon Thermal Wind Sensors

Temperature Effects on the Wind Direction Measurement of 2D Solid Thermal Wind Sensors

Research on Dust Effect for MEMS Thermal Wind Sensors

Temperature Effects of a Ceramic MEMS Thermal Wind Sensor Based on a Temperature-Balanced Mode

Analysis on Thermal Performance of Silicon Wind Sensor

Modeling and Simulation of Self-Heating Effect with Temperature Difference Air Flow Sensor

Modelling and Characterization of a Robust, Low-Power and Wide-Range Thermal Wind Sensor

Micro anemometer by a MEMS compatible lab-on-a-tube technology

Development of A Self-Packaged 2d Mems Thermal Wind Sensor for Low Power Applications

Sensitivity Improvement of a 2D MEMS Thermal Wind Sensor for Low-Power Applications

Sensitivity Analysis of Micromachined Thermal Wind Sensor Based on Back Surface Sensing Mode

Investigation of MEMS Thermal Wind Sensors in Martian Environment

The Influence of Humidity on the Performance of a Low-Cost Air Particle Mass Sensor and the Effect of Atmospheric Fog

Efficient system-level simulations of thermal wind sensors considering environmental factors

Effect of Packaging Asymmetry on the Performance of A 2d Mems Thermal Wind Sensor with Different Heating Geometries

Drie Trenches And Full-Bridges Design For Sensitivity Improvement Of Mems Silicon Thermal Wind Sensor

Humidity Hysteresis and Temperature Property of MWNT-SiO2 Thin Film Humidity Sensor at AC Testing

Temperature and Humidity Effects on SAW Hydrogen Sensor and Compensation Method