Abstract:This paper demonstrates a highly sensitive humidity sensor based on carbon nanotube and poly (dimethyldiallylammonium chloride) composite films. The composite film is deposited between interdigitated electrodes on a Si/SiO2 substrate through layer-by-layer self-assembly technique. The resistance stability of the composite film is effectively improved through thermal annealing, and I-V characteristic of the film exhibits a very good linear behavior. The resistance increases exponentially with relative humidity from 20% to 98%, and a much higher sensitivity in comparison with pure carbon nanotube networks is achieved. With temperature increased, the water vapor density versus RH shifts upwards, while the resistance is reduced downwards. The resistance is dependent on temperatures with a negative coefficient. The composite films with multiwalled carbon nanotubes show an adjacent sensitivity, compared with the single-walled carbon nanotube composite films. The experimental results show that the humidity sensors have a fast response and a short recovery time, and their response is reversible. A simple model is proposed to explain the change of composite film resistance with humidity. The carbon nanotubes junctions may play a more important role in the overall resistance change for water molecule absorption.

Humidity Hysteresis and Temperature Property of MWNT-SiO2 Thin Film Humidity Sensor at AC Testing

Composite Content Influence on Multiwall Carbon Nanotubes-SiO2 Film Humidity Sensors at AC Testing

Humidity Sensor Based on Multi-Walled Carbon Nanotube Thin Films

Carbon nanotubes humidity sensor based on high testing frequencies

Frequency Properties of Multi-Walled Carbon Nanotube Humidity Sensor

An Excellent Humidity Sensor Made of Surface Acoustic Wave Resonator Coated with MWCNTs/Nafion Composite Material Films

High-Performance QCM Humidity Sensors Using Acidized-Multiwalled Carbon Nanotubes As Sensing Film

Humidity Sensitivity of Carbon Nanotube and Poly (dimethyldiallylammonium Chloride) Composite Films

A Flexible Humidity Sensor Based on KC–MWCNTs Composites

Study on the Humidity Sensitive Behavior of Multiwalled Carbon Nanotubes

Humidity Sensitivity Of Multi-Walled Carbon Nanotube Networks Deposited By Dielectrophoresis

Research into Humidity Sensors Based on Multi-Wall Carbon Nanotubes

Design of Conductive MWNTs/SiO<sub>2</sub> Humidity Sensor Interface ASIC Based on AC Signals

Novel capacitance-type humidity sensor based on multi-wall carbon nanotube/SiO 2 composite films

Humidity Switching Properties of Sensors Based on Multiwalled Carbon Nanotubes/polyvinyl Alcohol Composite Films

Humidity sensors based on the composite of multi-walled carbon nanotubes and crosslinked polyelectrolyte with good sensitivity and capability of detecting low humidity

Design of conductive MWNTs/SiO2 humidity sensor interface ASIC based on AC signals

Quartz Crystal Microbalance Coated with Carbon Nanotube Films Used As Humidity Sensor

Study on Dielectric Properties of Humidity Sensing Nanometer Materials

Study of Humidity Sensors Based on Nanostructured Carbon Films Produced by Physical Vapor Deposition

Capacitance-type MWCNTs/SiO2 Humidity Sensor Based on Capillary Condensation and Percolation Theory