Abstract:Sensitive H-2 gas sensors are highly desirable for the prediction and early-warning of H-2 leakage. Low-dimensional nanostructures of metal oxide semiconductor emerge as promising materials candidates, but it remains a challenge to preserve the nanostructures in the real sensors. In this work, we demonstrated highly sensitive H-2 gas sensors based on porous network of SnO2 nanowires that exhibited ultrasmall diameter similar to 2 nm. Colloidal SnO2 nanowires synthesized via a solvothermal process were drop-coated onto the commercial alumina substrates, followed by in-situ annealing treatment at 350 degrees C to remove the surface ligands. The sensors exhibited sensitive response with linear dependence on the H-2 gas concentration ranging from 2 ppm to 100 ppm when operated at 250 degrees C. Typically, the sensor had a response of 13 toward 40 ppm of H-2, with the response and recovery time being 15 s and 31 s, respectively. To further improve the sensor performance, Palladium doped SnO2 nanowires were thoroughly investigated. It's shown that, the operating temperature of the sensor decreased from 250 degrees C to 150 degrees C after Pd doping, and the response and recovery time decreased to 6 s/3 s. The superb sensitivity was attributed to the enhanced gas reception, electron transport as well as utility factor owing to the network nanostructure of ultrathin SnO2 nanowires and catalytic activity of Pd, according to theoretical calculation and adsorption kinetics studies. Combined with the excellent solution processability, the colloidal SnO2 nanowires are potentially attractive for next-generation gas sensors with lower power consumption and integration with silicon-based substrates.

High-temperature humidity sensors based on WO3–SnO2 composite hollow nanospheres

QCM-based Humidity Sensor and Sensing Properties Employing Colloidal SnO2 Nanowires

Sensitive H2 Gas Sensors Based on SnO2 Nanowires

TiO2-SnS2 Nanoheterostructures for High-Performance Humidity Sensor

Preparation and Research of a High-Performance ZnO/SnO2 Humidity Sensor

Humidity-independent gas sensor based on Pt/SnO 2 /NiO with advanced CO sensing capabilities

High-performance Flexible Humidity Sensor Based on B-TiO2/ SnS2 Nanoflowers for Non-Contact Sensing and Respiration Detection

High-performance humidity sensor using Schottky-contacted SnS nanoflakes for noncontact healthcare monitoring

Designing High Performance Carbon/ZnSn(OH)6-Based Humidity Sensors

Humidity Sensors Using in Situ Synthesized Sodium Polystyrenesulfonate/zno Nanocomposites.

A Fast Humidity Sensor Based on Li+-Doped SnO2 One-Dimensional Porous Nanofibers

Ultrasensitive H2S Gas Sensor Based on SnO2 Nanoparticles Modified WO3 Nanocubes Heterojunction

Ultrafast Self-Assembly MoS2/Cu(OH)2 Nanowires for Highly Sensitive Gamut Humidity Detection with an Enhanced Self-Recovery Ability.

Three-Dimensional Hierarchical Sno2 Dodecahedral Nanocrystals with Enhanced Humidity Sensing Properties

Study of the ZnO/MoS 2 heterostructures-based gas sensor for humidity-independent response

Humidity Sensors Based on ZnO/TiO2 Core/shell Nanorod Arrays with Enhanced Sensitivity

Highly sensitive and selective triethylamine sensor based on SnO2@ZnO nanocomposite synthesized apply high humidity atmosphere

A Flexible Humidity Sensor Based on Co3O4 Nanoneedles with High Sensitivity and Quick Response

A Highly Stable Optical Humidity Sensor

A humidity sensor based on KCl-doped SnO2 nanofibers

Gr/3D–ZnO Nanocomposites as Humidity Sensors with Enhanced Sensing Response