Abstract:High density, fine pitch wafer level bonding technology is necessary for heterogeneous integration. However, underfill would be a challenging when bonding pitch decreases. Hybrid bonding technology with metal-to-metal and passivation-to-passivation bonding simultaneously was considered as a feasible solution. In this work, a hybrid bonding scheme with asymmetric embedded Cu-Sn/Cu bumps structure was investigated. Photosensitive BCB used as passivation materials was coated on only one side of bonding pairs. This asymmetric structure allows for precise alignment. BCB curing and Cu-Sn Solid-liquid-diffusion bonding were both achieved under the temperature of 250°C. The thickness of BCB and metal was concisely designed considering the volume shrinking of polymer during bonding process. To achieve void free hybrid bonding interface, efforts were mainly paid to some key aspects. Surface pre-treatment were firstly introduced to ensure no oxidation and residual polymer on the surface of bumps before bonding. A combination of plasma and formic gas treatment were adopted. Furthermore, considering coefficients of thermal expansion (CTE) mismatch of BCB and embedded bumps, a compatible bonding process with well-matched temperature and stress was proposed and optimized to get a void-free bonding interface under the guidance of independent variable test result. Bonding interface microstructure was observed and mechanical test, electrical test of Kelvin and daisy-chain structure were performed to evaluate bonding quality, also reliability test which included HTST and TCT had been carried out. The results confirmed that embedded bump hybrid bonding would be a convincing technology for future 3D integration.

Low temperature solid-state-diffusion bonding for fine-pitch Cu/Sn/Cu interconnect

Solid-State-Diffusion Bonding for Wafer-Level Fine-Pitch Cu/Sn/Cu Interconnect in 3-D Integration

Experimental and computational investigation of low temperature Cu-Sn solid-state-diffusion bonding for 3D integration

Low-Temperature Ultrasonic Bonding of Cu/Sn Microbumps with Au Layer for High Density Interconnection Applications

Effects of Bonding Parameters on the Reliability of Fine-Pitch Cu/Ni/SnAg Micro-Bump Chip-to-Chip Interconnection for Three-Dimensional Chip Stacking

Low Temperature and Short Time Au/Sn Solid-liquid Diffusion Bonding for 3D Integration

Low Temperature Fine-Pitch Wafer-Level Cu-Cu Bonding Using Nanoparticles Fabricated by PVD

Low Temperature Cu-Sn Bonding By Isothermal Solidification Technology

An Insertion-Based Mechanical Interlock Cu-Sn Bonding Structure for Three-Dimensional Integration

Cu-Sn low-temperature stack bonding for 3D packaging

Low Temperature Fine Pitch Au-In Solid Liquid Inter Diffusion Bonding for Wafer Level Packaging

Fine-pitch bump-less Cu-Cu bonding for wafer-on-wafer stacking and its quality enhancement.

Effects of Current Stress for Low Temperature Cu/Sn/Cu Solid-State-Diffusion Bonding

Fast low-temperature–pressure Cu-Sn mechanical interlock bonding (MIB) applied for 3D integration

Development of Hybrid Bonding Process for Embedded Bump with Cu-Sn/BCB Structure

Bonding of 5 Μm Cu-Sn Micro Bumps Using Thermal Reflow and Solid-State Pre-Bonding

Mechanism Of Low Temperature Cu-In Solid-Liquid Interdiffusion Bonding In 3d Package

Room-temperature, Rapid, Solid-State Solder Bonding Technology for Future Ultra-High-density Interconnects Manufacturing

Fine-Pitch Cu-Sn Transient-Liquid-Phase Bonding Based on Reflow and Pre-Bonding

Low Temperature Cu Nanorod/Sn/Cu Nanorod Bonding Technology for 3D Integration