Abstract:The common nonpolar switching behavior of binary oxide-based resistive random access memory devices (RRAMs) has several drawbacks in future application, such as the requirements for a high forming voltage, a large reset current, and an additional access device to settle the sneak-path issue. Herein, we propose the tuning of the switching behavior of binary oxide-based RRAMs by inserting an ultra-thin chemically active metal nanolayer, and a case study on Ta2O5-Ta systems is provided. The devices are designed to be Pt/Ta2O5(5 - x/2)/Ta(x)/Ta2O5(5 - x/2)/Pt with x = 0, 2, or 4 nm. The reference devices without the Ta nanolayer exhibit an expected nonpolar switching behavior with a high forming voltage of similar to-4.5 V and a large reset current of >10 mA. In contrast, a self-compliance bipolar switching behavior with a low forming voltage of similar to-2 V and a small reset current of <1 mA is observed after inserting a 2 nm Ta nanolayer. When the Ta nanolayer is increased to 4 nm, a complementary resistive switching (CRS) behavior is found, which can effectively settle the sneak-path issue. The appearance of CRS behavior suggests that a thin Ta nanolayer of 4 nm is robust enough to act as an inner electrode. Besides, the behind switching mechanisms are thoroughly discussed with the help of a transmission electron microscope and temperature-dependent electrical measurements. All these results demonstrate the feasibility of tuning switching behavior of binary oxide-based RRAMs by inserting an ultra-thin chemically active metal nanolayer and might help to advance the commercialization of binary oxide-based RRAMs.

Improved Switching Uniformity and Low-Voltage Operation in ${\rm TaO}_{x}$ -Based RRAM Using Ge Reactive Layer

Improved switching uniformity and low-voltage operation in TaO x-based RRAM using Ge reactive layer

Resistive Switching Performance Improvement of ${\rm Ta}_{2}{\rm O}_{5-x}/{\rm TaO}_{y}$ Bilayer ReRAM Devices by Inserting ${\rm AlO}_{\delta}$ Barrier Layer

Improved Uniformity of TaOx-Based Resistive Random Access Memory with Ultralow Operating Voltage by Electrodes Engineering

Resistive Switching Performance Improvement Of Ta2o5-X/Taoy Bilayer Reram Devices By Inserting Alo Delta Barrier Layer

Ultralow Power Switching of Ta2O5/AlOXbilayer Synergistic Resistive Random Access Memory

Resistive Switching Behaviours and Novel Device Applications of Metal-Oxide-Si/Ge Structures

Tuning The Switching Behavior Of Binary Oxide-Based Resistive Memory Devices By Inserting An Ultra-Thin Chemically Active Metal Nanolayer: A Case Study On The Ta2o5-Ta System

Localized Metal Doping Effect on Switching Behaviors of TaOx-based RRAM Device

Uniform,fast,and Reliable CMOS Compatible Resistive Switching Memory

Forming-Free HfOx-Based Resistive Memory with Improved Uniformity Achieved by the Thermal Annealing-Induced Self-Doping of Ge

Variability Improvement of TiOx/Al2O3 Bilayer Nonvolatile Resistive Switching Devices by Interfacial Band Engineering with an Ultrathin Al2O3 Dielectric Material

Uniform 3D vertical AlOδ/Ta2O5−x/TaOy RRAM: Fabrication, characterization and mechanism analysis

Electrode-Induced Digital-To-Analog Resistive Switching in Taox-Based Rram Devices

Modeling and Optimization of Bilayered TaO X RRAM Based on Defect Evolution and Phase Transition Effects

Resistive Switching Performance of RRAM Device with Stacked Solution-based Dielectric Layers

Short Time High-Resistance State Instability of TaOx-Based RRAM Devices

Investigation of Resistive Switching in Bipolar Taox-Based Resistive Random Access Memory

Uniform 3d Vertical Alo Delta/Ta2o5-X/Taoy Rram: Fabrication, Characterization And Mechanism Analysis

Thermal impact on the resistance switching properties in tantalum oxide based RRAM

Unipolar $\hbox{tao}_{x}$ -Based Resistive Change Memory Realized with Electrode Engineering