Abstract:HfO2-based resistive random-access memory (RRAM) with a Ti buffer layer has been extensively studied as an emerging nonvolatile memory (eNVM) candidate because of its excellent resistive switching (RS) properties and CMOS process compatibility. However, a detailed understanding of the nature of Ti thickness-dependent RS and systematic thermal degradation research about the effect of post-metallization annealing (PMA) time on oxygen vacancy distribution and RS performance still needs to be included. Herein, the impact of Ti buffer layer thickness on the RS performance of the Al/Ti/HfO2/TiN devices is first addressed. Consequently, we have proposed a simple strategy to regulate the leakage current, forming voltage, memory window, and uniformity by varying the thickness of the Ti layer. Moreover, it is found that the device with 15 nm Ti shows the minimum cycle-to-cycle variability (CCV) and device-to-device variability (DDV), good retention (105 s at 85 °C), and superior endurance (104). In addition, thermal degradation of the Al/Ti(15 nm)/HfO2/TiN devices under different PMA times at 400 °C is carried out. It is found that the leakage current increases and the forming voltage and memory window decrease with the increase in PMA time due to the thermally activated oxidation of the Ti. However, when the PMA time increases to 30 min, the Ti can no longer capture oxygen from HfO2 due to the formation of self-limited TiOx. Therefore, the device shows superior thermal stability with a PMA time of 90 min at 400 °C and no degradation of the memory window, uniformity, endurance, or retention. This work demonstrates that the Ti/HfO2-based RRAM shows superior back-end-of-line compatibility with high thermal stability up to 400 °C for over an hour.

Uniform 3D vertical AlOδ/Ta2O5−x/TaOy RRAM: Fabrication, characterization and mechanism analysis

Uniform 3d Vertical Alo Delta/Ta2o5-X/Taoy Rram: Fabrication, Characterization And Mechanism Analysis

Ti/HfO2-Based RRAM with Superior Thermal Stability Based on Self-Limited TiOx

Electrothermal Modeling and Simulation of Resistive Random Access Memory (RRAM) with Different Resistive Switching Oxides

Novel Vertical 3D Structure of TaO X -Based RRAM with Self-localized Switching Region by Sidewall Electrode Oxidation

Study of Multi-Level Characteristics for 3D Vertical Resistive Switching Memory.

High-density WOx-based RRAM with a W-doped AlOx insertion layer

A Self-Compliance Rram Device for High Density Cross-Point Array Applications

Oxide-Based Rram: Uniformity Improvement Using A New Material-Oriented Methodology

Optimization of TiN/TaOx/HfO2/TiN RRAM Arrays for Improved Switching and Data Retention

Experimental Investigation of the Scalability of RRAM Device with Pt/[HfO<inf>x</inf>/AlO<inf>y</inf>]<inf>m</inf>/TiN Structure

16-Layer 3D Vertical RRAM with Low Read Latency (18ns), High Nonlinearity (>5000) and Ultra-low Leakage Current (~pa) Self-Selective Cells

1S1R Device with Self-Compliance Property for High Density Cross-Point Memory Applications

Encapsulation Layer Design and Scalability in Encapsulated Vertical 3D RRAM.

A TaO<sub>x</sub>-Based RRAM with Improved Uniformity and Excellent Analog Characteristics by Local Dopant Engineering

Experimental Investigation Of The Scalability Of Rram Device With Pt/[Hfox/Aloy](M)/Tin Structure

Fully CMOS Compatible 3D Vertical RRAM with Self-Aligned Self-Selective Cell Enabling Sub-5Nm Scaling

Super non-linear RRAM with ultra-low power for 3D vertical nano-crossbar arrays.

Resisitive Switching Variability Study on 1T1R AlOx/WOx-based RRAM Array

Uniform,fast,and Reliable CMOS Compatible Resistive Switching Memory

Stable Self-Compliance Resistive Switching in AlOδ/Ta2O5−x/TaOytriple Layer Devices