Abstract:The fabrication of a micro/nano-scale thermoelectric module is very challenging. In this paper, a reliableand efficient hybrid fabrication method for ultrathin thermoelectric devices based on the non-contact exposing, photoresist melting and microfabrication technology is presented. The total thickness of the thermoelectric module is about 1 μm. Experimental results indicate that ultrathin thermoelectric device works stable and reliable, and demonstrate that the method presented is suitable for fabrication of thinner and higher integrality devices beyond TE devices in the micro-nanoscale range. The peak output power density is 0.29 W/m 2 and 2.9×10 5 W/m 3 . The present research can provide a useful guide for the design of a micro/nano-scale thermoelectric device in the near future. Additionally, we have demonstrated a novel energy utilization that thermoelectric generation (TEG) device can achieve self-powering by radiative cooling (RC) continuously. An ultrathin TEG with a multilayer thermal emitter was fabricated to convert the heat from the environment into electricity directly by using radiative cooling. The TEG device was consisted of more than 46,000 P-N modules in series, and each two TE modules were connected by air bridge. Thermal emitter had 80.8% emissivity in the atmospheric window (8-13 μm). Besides, maximum temperature drop of 4 K was achieved. With zero energy input, the MEMS chip output voltage of the TEG-RC reached up to 0.5 mV, and the TEG-RC exhibited a continuous average 0.18 mV output for 24 h. Extreme temperature gradients were surprisingly formed in cross section of 1.5 μm thick for micro/nano film materials. In order to improve the thermoelectric efficiency, the crossplane thermal conductivities of nano-constructed Sb 2 Te 3 /(Cu, Ag, Au, Pt) thermoelectric multilayer thin films have been measured using time-domain thermo reflectance method. The interface morphology features of multilayer thin film samples were characterized by using scanning and transmission electron microscopes. The effects of interface microstructure on the cross-plane thermal conductivities of the multilayer thin films have been extensively examined and the thermal transfer mechanism has been explored. The results indicated that electron-phonon coupling occurred at the semiconductor/metal interface that strongly affected the cross-plane thermal conductivity. This work presents both experimental and theoretical understanding of the thermal transport properties of Sb 2 Te 3 /metal multilayer thin film junctions with important implications for exploring a novel approach to improving the thermoelectric conversion efficiency.

Wafer-level vacuum sealing and encapsulation for fabrication of CMOS MEMS thermoelectric power generators

Seal and Encapsulate Cavities for Complementary Metal-Oxide-Semiconductor Microelectromechanical System Thermoelectric Power Generators

Design, Fabrication, and Characterization of CMOS MEMS-Based Thermoelectric Power Generators

Development of vacuum packaged CMOS thermoelectric energy harvester

Design and Modeling of Vacuum Packaged MEMS Thermoelectric Power Generator Using Heat Dissipation Path

Design and Optimization of Wafer Bonding Packaged Microelectromechanical Systems Thermoelectric Power Generators with Heat Dissipation Path

Manufacturing and Measurement of CMOS-MEMS-Based Micro Thermoelectric Generators with Long-Length Thermocouples

Silicon integrated circuit thermoelectric generators with a high specific power generation capacity

Development of MEMS Process Compatible (Bi,Sb)2(Se,Te)3-Based Thin Films for Scalable Fabrication of Planar Micro-Thermoelectric Generators

Numerical Modeling of the Performance of Thermoelectric Module with Polydimethylsiloxane Encapsulation

Comprehensive Performance Prediction and Power Promotion for Wearable Thermoelectric Generator with Flexible Encapsulation in Practical Application

Bilayer Y-Type Transverse Thermoelectric Generator with Non-contact Vertical Thermal Coupling using LTCC Technology

Manufacturing thermoelectric micro modules using micromachined silicon wafers

Simultaneous Realization of Flexibility and Ultrahigh Normalized Power Density in a Heatsink-Free Thermoelectric Generator via Fine Thermal Regulation

Towards high integration and power density: Zigzag-type thin-film thermoelectric generator assisted by rapid pulse laser patterning technique

Planar-type SiGe thermoelectric generator with double cavity structure

Development of Thermoelectric Microdevices by Combining Materials Processing and Silicon Micromachining Technology

Operating Temperature Dependency of Power Generation Capacity in Silicon Planar-Integrated Microthermoelectric Generators

MEMS Thermoelectric Power Chip for Large Scale Thermal Energy Harvesting

Modeling, properties, and fabrication of a micromachined thermoelectric generator

Manufacturing and Characterization of a Thermoelectric Energy Harvester Using the CMOS-MEMS Technology