Abstract:This brief presents a 0.5-8 GHz CMOS RF receiver front-end (RxFE) tailored for cognitive radio (CR) and digital phased array (DPA) applications. The RxFE comprises a wideband mixer with noise suppression capability, along with a reconfigurable band-pass filter (BPF) designed to adapt to different intermediate frequencies (IFs) and signal bandwidths (SBWs). Additionally, the BPF functions as a programmable gain amplifier (PGA), enabling support for a large dynamic range with fine gain adjustment. The BPF offers a programmable center frequency (CF) range from 250 MHz to 450 MHz with a 5 MHz step, as well as support for tunable passbands from 60 MHz to 240 MHz with 5 MHz resolution. The RF RxFE provides a gain control range of 15-to-55 dB with a 0.5 dB gain step. Fabricated in a standard 55 nm CMOS process, the prototype occupies an area of 2.29 mm2 including pads, consuming 75.6mW power without an on-chip high-IF BPF and 226.8mW with it at 2.3GHz LO input. Measurement results indicate that the prototype achieves approximately 10 ns gain switching time and 350 ns frequency hopping time when driven by an external fast-switching local oscillation (LO) signal, attributed to its high IF architecture. The receiver demonstrates exceptional agility, meeting the stringent requirements of CR and DPA applications.

A Direct Conversion WiMAX RF Receiver Front-End in CMOS Technology

A High Performance 2-Ghz Direct-Conversion Front End with Single-Ended RF Input in 0.13 Um CMOS

A compact dual-band direct-conversion CMOS transceiver for 802.11a/b/g WLAN

A Low-Power Low-Noise Direct-Conversion Front-End with Digitally Assisted IIP2 Background Self Calibration

Design of a Low Power 60ghz OOK Receiver in 65nm CMOS Technology

A 0.5-8Ghz Reconfigurable CMOS RF Receiver Front-end for CR and DPA Applications

A 1 GHz CMOS RF front-end IC for a direct-conversion wireless receiver

A C-Band Four-Channel Receiver with Current-Sharing and Large-Signal Multigated-Transistor Techniques in 65-Nm CMOS

Digitally Assisted IIP2 Calibration for CMOS Direct-Conversion Receivers

A 100mhz-2ghz Wireless Receiver In 40-Nm Cmos For Software-Defined Radio

A Direct Conversion WLAN Receiver

A 130nm CMOS direct conversion transmitter for WCDMA

A Low-Power Monolithic Reconfigurable Direct-Conversion Receiver RF Front-End for 802.11a/b/g Applications

A Dual-Band Reconfigurable Direct-Conversion Receiver Rf Front-End

A 0.13&#x03bc;m CMOS UWB Receiver Front-End Using Passive Mixer

Performance evaluation and receiver front-end design for on-chip millimeter-wave wireless interconnect

A Low Power 3–5 GHz CMOS UWB Receiver Front-End

An Optimized Receiver RF Front-End

Archer: an Automated Rf-Ic Rx Front-End Circuit Design Tool

A Low Voltage CMOS RF Front-End for IEEE 802.11b WLAN Transceiver

A 28-/60-GHz Dual-Band Receiver Front-End With Sideband-Selection Technique in 65-nm CMOS