Abstract:With the increase in power consumption in compact electronic devices, passive heat transfer cooling technologies with high-heat-flux characteristics are highly desired in microelectronic industries. Carbon nanotube (CNT) clusters have high thermal conductivity, nanopore size, and large porosity and can be used as wick structure in a heat pipe heatspreader to provide high capillary force for high-heat-flux thermal management. This paper reports investigations of high-heat-flux cooling of the CNT biwick structure, associated with the development of a reliable thermometer and high performance heater. The thermometer/heater is a 100-nm-thick and 600 μm wide Z-shaped platinum wire resistor, fabricated on a thermally oxidized silicon substrate of a CNT sample to heat a 2×2 mm2 wick area. As a heater, it provides a direct heating effect without a thermal interface and is capable of high-temperature operation over 800°C. As a thermometer, reliable temperature measurement is achieved by calibrating the resistance variation versus temperature after the annealing process is applied. The thermally oxidized layer on the silicon substrate is around 1-μm-thick and pinhole-free, which ensures the platinum thermometer/heater from the severe CNT growth environments without any electrical leakage. For high-heat-flux cooling, the CNT biwick structure is composed of 250 μm tall and 100 μm wide stripelike CNT clusters with 50 μm stripe-spacers. Using 1×1 cm2 CNT biwick samples, experiments are completed in both open and saturated environments. Experimental results demonstrate 600 W/cm2 heat transfer capacity and good thermal and mass transport characteristics in the nanolevel porous media.

Characterize the Thermal Properties of the Vertical Aligned Carbon Nanotubes Array Used for IC Cooling with Photothermal Method

Thermal Properties of Carbon Nanotube Array Used for Integrated Circuit Cooling

Electrothermal Characterization of Carbon Nanotube Field Effect Transistors (Cntfets)

Electrothermal Characterization of Single-Walled Carbon Nanotube (SWCNT) Interconnect Arrays

Investigation on self-heating effect in carbon nanotube field-effect transistors

Quantitative Thermal Imaging of Single-Walled Carbon Nanotube Devices by Scanning Joule Expansion Microscopy.

Nanoscale Heat Transport of Vertically Aligned Carbon Nanotube Bundles for Thermal Management Applications

High-Quality Vertically Aligned Carbon Nanotubes for Applications as Thermal Interface Materials

Double-Sided Transferred Carbon Nanotube Arrays for Improved Thermal Interface Materials

Raman measurement of heat transfer in suspended individual carbon nanotube

Thermal Management for Purification of Aligned Arrays of Single-Walled Carbon Nanotubes Based on Thermocapillary Flow by Pulsed Heating

Effect of Contact Pressure on the Performance of Carbon Nanotube Arrays Thermal Interface Material

Thermal resistance of thermal conductive adhesive anchored carbon nanotubes interface material

Interfacial Thermal Resistance and Thermal Rectification in Carbon Nanotube Film-Copper Systems

Design and Test of Carbon Nanotube Biwick Structure for High-Heat-Flux Phase Change Heat Transfer

Thermal Performance of Vertically-Aligned Multi-Walled Carbon Nanotube Array Grown on Platinum Film

Thermal Characterization of Carbon Nanotube Fiber by Time-Domain Differential Raman

Experimental design and testing of the electrothermal properties of carbon nanotube film

Advances of CNT-based Systems in Thermal Management

Non-Contact Thermal Characterization of Individual Multi-wall Carbon Nanotubes

Vertically aligned carbon nanotubes grown on reduced graphene oxide as high-performance thermal interface materials