Abstract:Carbon nanotubes and graphene are promising materials for thermal management applications due to their high thermal conductivities. However, their thermal properties are anisotropic, and the radial or cross-plane direction thermal conductivity is low. A 3D Carbon nanotube (CNT)-graphene structure has previously been proposed to address this limitation, and direct molecular dynamics simulations have been used to predict the associated thermal conductivity. In this work, by recognizing that thermal resistance primarily comes from CNT-graphene junctions, a simple network model of thermal transport in pillared graphene structure is developed. Using non-equilibrium molecular dynamics, the resistance across an individual CNT-graphene junction with sp2 covalent bonds is found to be around 6×10−11 m2K/W, which is significantly lower than typical values reported for planar interfaces between dissimilar materials. In contrast, the resistance across a van der Waals junction is about 4×10−8 m2K/W. Interestingly, when the CNT pillar length is small, the interfacial resistance of the sp2 covalent junction is found to decrease as the CNT pillar length decreases, suggesting the presence of coherence effects. To explain this intriguing trend, the junction thermal resistance is decomposed into interfacial region and boundary components, and it is found that while the boundary resistance has little dependence on the pillar length, the interfacial region resistance decreases as the pillar length decreases. This is explained by calculating the local phonon density of states (LDOS) of different regions near the boundary. The LDOS overlap between the interfacial region and the center region of CNT increases as the pillar length decreases, leading to the decrease of interfacial region resistance. The junction resistance Rj is eventually used in the network model to estimate the effective thermal conductivity, and the results agree well with direct MD simulation data, demonstrating the effectiveness of our model.

Interfacial Thermal Resistance and Thermal Rectification in Carbon Nanotube Film-Copper Systems

Electrothermal Characterization of Carbon Nanotube Field Effect Transistors (Cntfets)

Investigation on self-heating effect in carbon nanotube field-effect transistors

Nano-engineering Thermal Transport Performance of Carbon Nanotube Networks with Polymer Intercalation: a Molecular Dynamics Study.

Thermal Conductivity Of Configurable Two-Dimensional Carbon Nanotube Architecture And Strain Modulation

Prediction of highly thermal rectification behavior in carbon/C3N heteronanotubes based on nonequilibrium molecular dynamics simulations

Thermal boundary resistances of carbon nanotubes in contact with metals and polymers.

Thermal boundary resistance and thermal rectification in VACNT arrays integrated with SnZn alloys

Molecular Dynamics Simulations of Thermal Transport of Carbon Nanotube Interfaces

Quantitative Thermal Imaging of Single-Walled Carbon Nanotube Devices by Scanning Joule Expansion Microscopy.

Interface Engineering for High-Performance Thermoelectric Carbon Nanotube Films

Giant Thermal Rectification from Single-Carbon Nanotube-Graphene Junction.

Interfacial Thermal Conductance of Buckling Carbon Nanotubes

Thermal Rectification Modulation of Parallel Multiple Carbon/Boron Nitride Heteronanotubes

Measurement of the intrinsic thermal conductivity of a multiwalled carbon nanotube and its contact thermal resistance with the substrate

Raman measurement of heat transfer in suspended individual carbon nanotube

Asymmetrical carbon nanotubes exhibit opposing thermal rectification behaviors under different heat baths

Thermal transport across the interface between a suspended single-walled carbon Nanotube and air

Thermal Properties of Carbon Nanotube Array Used for Integrated Circuit Cooling

Thermal resistance of thermal conductive adhesive anchored carbon nanotubes interface material

Thermal transport across carbon nanotube-graphene covalent and van der Waals junctions