Abstract:Carbon nanotubes and graphene are promising materials for thermal management applications due to their high thermal conductivities. However, their thermal properties are anisotropic, and the radial or cross-plane direction thermal conductivity is low. A 3D Carbon nanotube (CNT)-graphene structure has previously been proposed to address this limitation, and direct molecular dynamics simulations have been used to predict the associated thermal conductivity. In this work, by recognizing that thermal resistance primarily comes from CNT-graphene junctions, a simple network model of thermal transport in pillared graphene structure is developed. Using non-equilibrium molecular dynamics, the resistance across an individual CNT-graphene junction with sp2 covalent bonds is found to be around 6×10−11 m2K/W, which is significantly lower than typical values reported for planar interfaces between dissimilar materials. In contrast, the resistance across a van der Waals junction is about 4×10−8 m2K/W. Interestingly, when the CNT pillar length is small, the interfacial resistance of the sp2 covalent junction is found to decrease as the CNT pillar length decreases, suggesting the presence of coherence effects. To explain this intriguing trend, the junction thermal resistance is decomposed into interfacial region and boundary components, and it is found that while the boundary resistance has little dependence on the pillar length, the interfacial region resistance decreases as the pillar length decreases. This is explained by calculating the local phonon density of states (LDOS) of different regions near the boundary. The LDOS overlap between the interfacial region and the center region of CNT increases as the pillar length decreases, leading to the decrease of interfacial region resistance. The junction resistance Rj is eventually used in the network model to estimate the effective thermal conductivity, and the results agree well with direct MD simulation data, demonstrating the effectiveness of our model.

Thermal boundary resistances of carbon nanotubes in contact with metals and polymers.

Low Interfacial Thermal Resistance Between Crossed Ultra-Thin Carbon Nanothreads

Nano-engineering Thermal Transport Performance of Carbon Nanotube Networks with Polymer Intercalation: a Molecular Dynamics Study.

Temperature dependence of thermal boundary resistances between multiwalled carbon nanotubes and some typical counterpart materials.

Carbon Nanotube Vias: Does Ballistic Electron–Phonon Transport Imply Improved Performance and Reliability?

Modeling of carbon nanotube (CNT) interconnects

Thermal Conductivity Of Configurable Two-Dimensional Carbon Nanotube Architecture And Strain Modulation

Temperature Effects on Crosstalk in Carbon Nanotube Interconnects

Thermal resistance of thermal conductive adhesive anchored carbon nanotubes interface material

Interfacial Thermal Resistance and Thermal Rectification in Carbon Nanotube Film-Copper Systems

Thermal Resistance Between Crossed Carbon Nanotubes: Molecular Dynamics Simulations and Analytical Modeling

Ultrahigh Convergent Thermal Conductivity of Carbon Nanotubes from Comprehensive Atomistic Modeling

Effect of Contact Pressure on the Performance of Carbon Nanotube Arrays Thermal Interface Material

Thermal transport across the interface between a suspended single-walled carbon Nanotube and air

Nanoengineering Heat Transfer Performance At Carbon Nanotube Interfaces

Advances of CNT-based Systems in Thermal Management

Thermal transport across carbon nanotube-graphene covalent and van der Waals junctions

Thermal Properties of Carbon Nanotube Array Used for Integrated Circuit Cooling

Thermal boundary resistance and thermal rectification in VACNT arrays integrated with SnZn alloys

Molecular Dynamics Simulations of Thermal Transport of Carbon Nanotube Interfaces

Bidirectional Modulation of Contact Thermal Resistance between Boron Nitride Nanotubes from a Polymer Interlayer