Abstract:Carbon nanotube (CNT) fiber is a promising material due to its extensive potential in micro/nanoelectronics, where the thermal performance is of great importance. In this work, a well-developed steady-state electro-Raman-thermal technique is employed and extended to the ambient environment for measuring thermal conductivity of the CNTs fiber. In this technique, two ends of the CNT fiber are attached to heat sinks and a steady electrical current flows in a sample to induce Joule heating. The heat dissipates to the ambient air and goes through the sample to the heat sinks. With combined effects of natural heat convection and heat conduction, a steady temperature profile along the sample can be established. The middle point temperature of the fiber is probed by measuring the local Raman spectrum. It is because the Raman scattering (such as G peak) of CNT fiber is temperature dependent and thus it can be used as a temperature indicator for thermal property measurement. In calibration experiment, the temperature coefficient of the G peak of CNT fiber is first obtained. A modified one-dimensional heat conduction solution involving free convection effect is derived as #br#T(x) =((I2R)/(hLS))(1 -(e√(hS)/(kAc)x)+e-√(hS)/((kAc)x)/(e√(hS)/(kAc)L/2)+e-√(hS)/(kAc)L/2))+ T0. It can be found that the relationship between middle point temperature (T0) and applied Joule heating power (I2R) can be used to extract the thermal conductivity of the material (k) as long as the convection coefficient (h) is available. In this work, the convection coefficient is calculated by the model established by Peirs et al. The thermal conductivity of CNT fiber synthesized from floating catalyst method is measured to be 66.93 W/(m·K)± 11.49 W/(m·K). This value is a little bit larger than that of other CNT fibers synthesized by the acid spun method or the dry-spinning method, which can be explained by the different sample structures induced from different synthesize method. This value is two orders of magnitude smaller than that of individual carbon nanotube, and two orders of magnitude larger than that of CNTs packed bed, showing that heat conduction in CNT based bulk material is determined mainly by a large number of thermal interfaces between CNTs contacts rather than the intrinsic thermal property of CNT.

Thermal transport across the interface between a suspended single-walled carbon Nanotube and air

Raman measurement of heat transfer in suspended individual carbon nanotube

Experimental study on the thermal conductivity enhancement of water based nanofluids using different types of carbon nanotubes

Experimental Investigation and Modelling on the Thermal Conductivity of CNTs Based Nanofluids

Interfacial Heat Flow in Carbon Nanotube Suspensions

Heat transfer between an individual carbon nanotube and gas environment in a wide knudsen number regime

Measuring Thermal Conductivity of an Individual Carbon Nanotube Using Raman Spectroscopy

Measurement of the intrinsic thermal conductivity of a multiwalled carbon nanotube and its contact thermal resistance with the substrate

Thermal Conductance Between <6 Nm Single-Walled Carbon Nanotube Bundle and Si Substrate

Quantitative Thermal Imaging of Single-Walled Carbon Nanotube Devices by Scanning Joule Expansion Microscopy.

Thermal Conductivity Reduction in Carbon Nanotube by Fullerene Encapsulation: A Molecular Dynamics Study

Thermal Characterization of Carbon Nanotube Fibers Based on Steady-State Electro-Raman-Thermal Technique

Thermal Characterization of Carbon Nanotube Fiber by Time-Domain Differential Raman

Thermal conductance of an individual single-wall carbon nanotube above room temperature

Contact Thermal Resistance Between Individual Multiwall Carbon Nanotubes

Measuring the thermal conductivity of individual carbon nanotubes by the Raman shift method.

Thermal transport in suspended SWCNTs at high heat fluxes

Thermal Transport Characteristics of Supported Carbon Nanotube: Molecular Dynamics Simulation and Theoretical Analysis

Molecular Dynamics Simulations of Thermal Transport of Carbon Nanotube Interfaces

Differential Multi-probe Thermal Transport Measurements of Multi-walled Carbon Nanotubes grown by Chemical Vapor Deposition

Interfacial Thermal Conductance Between Carbon Nanotubes From Nonequilibrium Green'S Function Method