Abstract:Carbon nanotubes (CNTs) have exhibited immense potential for applications in biology and medicine, and once their intended purpose is fulfilled, the elimination of residual CNTs is essential to avoid negative effects. In this study, we demonstrated the effective collection and simple removal of CNTs dispersed in a suspension via thermal convection. First, a tapered fiber tip with a cone angle and end diameter of 10° and 3 μm, respectively, was fabricated via a heating and pulling method. Further, a laser beam with a power and wavelength of 100 mW and 1.55 μm, respectively, was launched into the tapered fiber tip, which was placed in a CNT suspension, resulting in the formation of a microbubble on the fiber tip. The temperature gradient on the microbubble and suspension surface induced thermal convection in the suspension, which resulted in the accumulation of CNTs on the fiber tip. The experimentally formed CNT cluster possessed a circular top surface with a diameter of 87 μm and an arched cross-section with a height of 19 μm. Furthermore, this CNT cluster was firmly attached to the fiber tip. Therefore, the removal of CNT clusters can be realized by simply removing the fiber tip from the suspension. Moreover, we simulated the thermal convection that caused CNT aggregation. The obtained results indicate that convection near the fiber tip flows toward it, which pushes the CNTs toward the fiber tip and enables their attachment to it. Further, the flow velocity is symmetrically distributed as a Gaussian function, which results in the formation of a circular top surface and arched cross-sectional profile for the CNT cluster. Our method may be applied in biomedicine for the collection and removal of nano-drug residues.

Thermal Analysis For Laser Selective Removal Of Metallic Single-Walled Carbon Nanotubes

Laser-induced Nanoscale Thermocapillary Flow for Purification of Aligned Arrays of Single-Walled Carbon Nanotubes.

Thermal Management for Purification of Aligned Arrays of Single-Walled Carbon Nanotubes Based on Thermocapillary Flow by Pulsed Heating

Modeling of thermocapillary flow to purify single-walled carbon nanotubes

Laser assisted selective removal of metallic carbon nanotubes

Quantitative Thermal Imaging of Single-Walled Carbon Nanotube Devices by Scanning Joule Expansion Microscopy.

Investigation on self-heating effect in carbon nanotube field-effect transistors

Laser Induced Selective Removal of Metallic Carbon Nanotubes

Thermomechanical Modeling of Scanning Joule Expansion Microscopy Imaging of Single-Walled Carbon Nanotube Devices

Thermal analysis of Single-Wall Carbon Nanotubes in laser hyperthermia of cancer

Microwave Purification of Large-Area Horizontally Aligned Arrays of Single-Walled Carbon Nanotubes

Thermal transport across the interface between a suspended single-walled carbon Nanotube and air

Application of single walled carbon nanotubes for heating agent in photothermal therapy

Femtosecond Laser Treatment of SWNT Onto Metal Electrodes and Its Effect on Carbon Nanotube Field Effect Transistor

Laser-Heating Effect on Raman Spectra of Individual Suspended Single-Walled Carbon Nanotubes

Demetalization of Single-Walled Carbon Nanotube Thin Films with Microwave Irradiation

THE CARBON NANOTUBE-EMBEDDED BOUNDARY LAYER THEORY FOR ENERGY HARVESTING

[Photothermal Effects of Metallic Carbon Nanotubes on Human Breast Cancer Cells].

Selective Electrochemical Etching of Single‐Walled Carbon Nanotubes

Light-induced Thermal Convection for Collection and Removal of Carbon Nanotubes

Optical visualization and polarized light absorption of the single-wall carbon nanotube to verify intrinsic thermal applications