Abstract:Carbon nanotubes and graphene are promising materials for thermal management applications due to their high thermal conductivities. However, their thermal properties are anisotropic, and the radial or cross-plane direction thermal conductivity is low. A 3D Carbon nanotube (CNT)-graphene structure has previously been proposed to address this limitation, and direct molecular dynamics simulations have been used to predict the associated thermal conductivity. In this work, by recognizing that thermal resistance primarily comes from CNT-graphene junctions, a simple network model of thermal transport in pillared graphene structure is developed. Using non-equilibrium molecular dynamics, the resistance across an individual CNT-graphene junction with sp2 covalent bonds is found to be around 6×10−11 m2K/W, which is significantly lower than typical values reported for planar interfaces between dissimilar materials. In contrast, the resistance across a van der Waals junction is about 4×10−8 m2K/W. Interestingly, when the CNT pillar length is small, the interfacial resistance of the sp2 covalent junction is found to decrease as the CNT pillar length decreases, suggesting the presence of coherence effects. To explain this intriguing trend, the junction thermal resistance is decomposed into interfacial region and boundary components, and it is found that while the boundary resistance has little dependence on the pillar length, the interfacial region resistance decreases as the pillar length decreases. This is explained by calculating the local phonon density of states (LDOS) of different regions near the boundary. The LDOS overlap between the interfacial region and the center region of CNT increases as the pillar length decreases, leading to the decrease of interfacial region resistance. The junction resistance Rj is eventually used in the network model to estimate the effective thermal conductivity, and the results agree well with direct MD simulation data, demonstrating the effectiveness of our model.

Thermal resistance of thermal conductive adhesive anchored carbon nanotubes interface material

Low Interfacial Thermal Resistance Between Crossed Ultra-Thin Carbon Nanothreads

Carbon Nanotube-Based Super Nanotubes: Tunable Thermal Conductivity in Three Dimensions

Thermal Conductivity Of Configurable Two-Dimensional Carbon Nanotube Architecture And Strain Modulation

Carbon Nanotube Vias: Does Ballistic Electron–Phonon Transport Imply Improved Performance and Reliability?

Carbon Nanotube Vias: A Reality Check

Modeling of carbon nanotube (CNT) interconnects

Thermal boundary resistances of carbon nanotubes in contact with metals and polymers.

Thermal Properties of Carbon Nanotube Array Used for Integrated Circuit Cooling

Double-Sided Transferred Carbon Nanotube Arrays for Improved Thermal Interface Materials

Metalized Nanotube Tips Improve Through Thickness Thermal Conductivity in Adhesive Joints

Enhancement of through-thickness thermal conductivity in adhesively bonded joints using aligned carbon nanotubes

Thermal transport across carbon nanotube-graphene covalent and van der Waals junctions

Effect of Contact Pressure on the Performance of Carbon Nanotube Arrays Thermal Interface Material

Advances of CNT-based Systems in Thermal Management

Architecting Three-Dimensional Networks in Carbon Nanotube Buckypapers for Thermal Interface Materials

Cu/oriented-carbon nanotubes composite with ultralow thermal contact resistance

Nanoscale Heat Transport of Vertically Aligned Carbon Nanotube Bundles for Thermal Management Applications

Thermal conductivity enhancement of benzocyclobutene with carbon nanotubes for adhesive bonding in 3-d integration

Nano Enabled Thermo-Mechanical Materials in Adhesive Joints: A New Paradigm to Materials Functionality (Preprint)

Interfacial Thermal Resistance and Thermal Rectification in Carbon Nanotube Film-Copper Systems