Abstract:Despite the ever-increasing demand of nanofillers for thermal enhancement of polymer composites with higher thermal conductivity and irregular geometry, nanomaterials like carbon nanotubes (CNTs) have been constrained by the nonuniform dispersion and difficulty in constructing effective three-dimensional (3D) conduction network with low loading and desired isotropic or anisotropic (specific preferred heat conduction) performances. Herein, we illustrated the in-situ construction of CNT based 3D heat conduction networks with different directional performances. First, to in-situ construct an isotropic percolated conduction network, with spherical cores as support materials, we developed a confined-growth technique for CNT-core sea urchin (CNTSU) materials. With 21.0 wt.% CNTSU loading, the thermal conductivity of composites reached 1.43 ± 0.13 W/(m·K). Secondly, with aligned hexagonal boron nitride (hBN) as an anisotropic support, we constructed CNT-hBN aligned networks by in-situ CNT growth, which improved the utilization efficiency of high density hBN and reduced the thermal interface resistance between matrix and fillers. With ~ 8.5 wt.% loading, the composites possess thermal conductivity up to 0.86 ± 0.14 W/(m·K), 374% of that for neat matrix. Due to the uniformity of CNTs in hBN network, the synergistic thermal enhancement from one-dimensional (1D) + two-dimensional (2D) hybrid materials becomes more distinct. Based on the detailed experimental evidence, the importance of purposeful production of a uniformly interconnected heat conduction 3D network with desired directional performance can be observed, particularly compared with the traditional direct-mixing method. This study opens new possibilities for the preparation of high-power-density electronics packaging and interfacial materials when both directional thermal performance and complex composite geometry are simultaneously required.

Cu/oriented-carbon nanotubes composite with ultralow thermal contact resistance

Thermal resistance of thermal conductive adhesive anchored carbon nanotubes interface material

The Interface Design of CNTs and Cu Matrix

Effect of Contact Pressure on the Performance of Carbon Nanotube Arrays Thermal Interface Material

Thermally conductive epoxy composites with efficient heat transfer pathways by in-situ growth of CNTs on oriented BNNS

Carbon Nanotube/Copper composites for via filling and thermal management

Enhancing the Thermoelectric Performance of Cu–Ni Alloys by Introducing Carbon Nanotubes

Mechanical and Conductive Properties of Cu Matrix Composites Reinforced by Oriented Carbon Nanotubes with Different Coatings

Excellent heat transfer enhancement of CNT-metal interface by loading carbyne and metal nanowire into CNT

Enhanced composite thermal conductivity by percolated networks of in-situ confined-grown carbon nanotubes

Thermal boundary resistances of carbon nanotubes in contact with metals and polymers.

Vertically aligned carbon nanotubes grown on reduced graphene oxide as high-performance thermal interface materials

Transient Thermo-Reflectance Method for Characterization of Thermal Interface Material Based on Carbon Nanotube Array

Nanoengineering Heat Transfer Performance At Carbon Nanotube Interfaces

Interface Engineering for High-Performance Thermoelectric Carbon Nanotube Films

Metal Injected Copper Carbon Nanotube Composite Material with High Thermal Conductivity and Low CTE for IGBT Power Modules

Reducing thermal contact resistance using a bilayer aligned CNT thermal interface material

Improvement of Interface and Electrical Properties in Carbon Nanotube/nanocrystalline Copper Composite Films

Achieving High-Thermal-conductivity Brazed Joint Between Carbon-Based Composites and Mo-Cu Alloys by Increasing the Heat Transfer Area

Dual-functional graphene/carbon nanotubes thick film: Bidirectional thermal dissipation and electromagnetic shielding

Highly Deformable Thermal Interface Materials Enabled by Covalently-Bonded Carbon Nanotubes