Abstract:Despite the ever-increasing demand of nanofillers for thermal enhancement of polymer composites with higher thermal conductivity and irregular geometry, nanomaterials like carbon nanotubes (CNTs) have been constrained by the nonuniform dispersion and difficulty in constructing effective three-dimensional (3D) conduction network with low loading and desired isotropic or anisotropic (specific preferred heat conduction) performances. Herein, we illustrated the in-situ construction of CNT based 3D heat conduction networks with different directional performances. First, to in-situ construct an isotropic percolated conduction network, with spherical cores as support materials, we developed a confined-growth technique for CNT-core sea urchin (CNTSU) materials. With 21.0 wt.% CNTSU loading, the thermal conductivity of composites reached 1.43 ± 0.13 W/(m·K). Secondly, with aligned hexagonal boron nitride (hBN) as an anisotropic support, we constructed CNT-hBN aligned networks by in-situ CNT growth, which improved the utilization efficiency of high density hBN and reduced the thermal interface resistance between matrix and fillers. With ~ 8.5 wt.% loading, the composites possess thermal conductivity up to 0.86 ± 0.14 W/(m·K), 374% of that for neat matrix. Due to the uniformity of CNTs in hBN network, the synergistic thermal enhancement from one-dimensional (1D) + two-dimensional (2D) hybrid materials becomes more distinct. Based on the detailed experimental evidence, the importance of purposeful production of a uniformly interconnected heat conduction 3D network with desired directional performance can be observed, particularly compared with the traditional direct-mixing method. This study opens new possibilities for the preparation of high-power-density electronics packaging and interfacial materials when both directional thermal performance and complex composite geometry are simultaneously required.

Carbon Nanotube/Copper composites for via filling and thermal management

Carbon Nanotube Vias: A Reality Check

Carbon Nanotube Vias: Does Ballistic Electron–Phonon Transport Imply Improved Performance and Reliability?

Fabrication of Three-dimensional Thermally Conductive Carbon Fibers/Carbon Nanotubes Network Reinforce Epoxy Composites

High-Frequency Analysis of Cu-Carbon Nanotube Composite Through-Silicon Vias

Electrothermal modelling of novel through-silicon carbon nanotube bundle vias (TS-CNTBV)

Electrothermal modelling and characterisation of submicron through-silicon carbon nanotube bundle vias for three-dimensional ICs

Modeling of Carbon Nanotube Interconnects and Comparative Analysis with Cu Interconnects

Modeling of carbon nanotube (CNT) interconnects

Electrothermal investigation on through silicon multi-walled carbon nanotube via interconnects

Electrothermal Cosimulation of 3-D Carbon-Based Heterogeneous Interconnects

Copper/carbon nanotube composite interconnect for enhanced electromigration resistance

Meaningful improvements on structural-thermal-electronic properties of copper based on 3D nitrogen (N) doped-carbon nanotubes (CNTs) interface fabricated by nano-self-assembly-sintering-modification

Vertically aligned CNT-Cu nano-composite material for stacked through-silicon-via interconnects

Carbon nanotube-copper fibers produced by electrospinning: electrical conductivity measurements

The Interface Design of CNTs and Cu Matrix

Enhanced composite thermal conductivity by percolated networks of in-situ confined-grown carbon nanotubes

Towards Future VLSI Interconnects Using Aligned Carbon Nanotubes

The Carbon Nanotube Based Nanocomposite with Enhanced Thermal Conductivity

Reliability Evaluation of Carbon Nanotube Interconnect in a Silicon CMOS Environment

Fabrication of high-performance carbon nanotube/copper composite fibers by interface thiol-modification